Fill Dirt in Meldrim, GA

Fill dirt is subsoil with little organic matter used to raise grades, fill holes, and build up building pads. In Meldrim it’s commonly used for yard grading, driveway approaches, and backfilling around foundations where topsoil or structural fill isn’t required. It is not the same as topsoil, so add topsoil if you plan to plant over it.

Prices vary by supplier, quality, and delivery distance, but in West Georgia fill dirt commonly runs about $8 to $25 per cubic yard delivered. Per ton pricing depends on material density, but that range roughly equals $6 to $20 per ton for most local fill dirt. Get a quote through Hello Gravel for a specific delivered price to your zip code.

A single truck delivery cost depends on the load size, distance, and supplier; a rough delivered range for a typical truckload of fill dirt in the area is about $150 to $500. Hello Gravel’s network uses tri-axle trucks and has a minimum order of 3 tons, with standard delivery in 2+ business days and optional next-day service for an extra fee. Request a quote in checkout to see exact charges for your address.

Most tri-axle dump trucks used by our suppliers carry about 10 to 12 cubic yards, which translates to roughly 12 to 18 tons of fill dirt depending on moisture and compaction. Exact capacity varies by truck and material moisture content, so Hello Gravel will confirm estimated tons when you order.

Yes, for most basic uses fill dirt is generally cheaper than crushed gravel or stone on a per-yard or per-ton basis because it is less processed. Gravel costs more because it is crushed, screened, and sometimes washed, but gravel may be preferable where drainage or surface traffic is a concern. Choose based on function: use fill dirt for bulk grading and gravel for finished surfaces and drainage.

Coverage depends on depth. As a rule of thumb, 1 ton of fill dirt is about 0.6 to 0.8 cubic yards, so at 1 inch depth it will cover roughly 200 to 260 square feet; at 4 inches it will cover about 50 to 65 square feet. Use the formula: (area in sq ft x depth in ft) / 27 = cubic yards, then multiply by the material density to convert to tons.

Buying in bulk (truckloads) from a local supplier is usually the most economical option, and using Hello Gravel lets you compare local suppliers and delivery fees in one place. Avoid bagged materials for large jobs, check whether recycled or screened fill is acceptable for your use, and request quotes for different delivery dates to find the best price. Remember Hello Gravel’s minimum is 3 tons, which helps keep per-ton costs lower than small orders.

Measure the area (length x width) and decide the depth you need, then use (area in sq ft x depth in ft) / 27 to get cubic yards. Convert cubic yards to tons by multiplying by a local density estimate (0.6 to 0.8 tons per cubic yard for typical fill dirt) and add 10% to 20% extra for compaction and settling. Or use Hello Gravel’s material calculator and select Fill Dirt to get a quick estimate.

Drivers may be able to perform tailgate spreading at their discretion, but this is not guaranteed and depends on safety, access, and truck positioning. Request tailgate spreading at checkout and the driver will assess whether it can be done safely upon arrival. For precise grading and compaction, hire local equipment or a landscaper after delivery.

Yes, fill dirt will settle over time, especially if placed in large lifts without compaction or if it contains organic pockets. Reduce settlement by placing fill in lifts, compacting each layer with a plate compactor, and allowing time for settlement before final grading or construction. For structural work near foundations or driveways in Meldrim, consult a local contractor or geotechnical engineer to specify compaction requirements.