Gravel in Irwin County, GA

Prices vary by material and supplier, but common gravel types in rural Irwin County typically range from about $25 to $60 per ton delivered. Washed or decorative gravels and specialty mixes sit at the higher end, while basic crushed stone or road base is toward the lower end. Check your ZIP code on Hello Gravel to see local supplier pricing and any delivery offers.

A full tri-axle truck in the Irwin County area usually carries about 10 to 12 tons of gravel, so delivered cost often falls in the $300 to $800 range depending on material type and haul distance. Hello Gravel offers transparent pricing and free delivery in many areas, so your actual fee may be lower—check your quote online. Additional fees may apply for remote delivery locations or tight access.

Local dump fleets that serve Irwin County typically use tri-axle trucks that haul about 10 to 12 tons of gravel per load. Smaller single-axle or larger end-dump trucks can carry less or more, so exact capacity depends on the truck type and material density. Your Hello Gravel quote will list the expected truck size and estimated tons for the delivery.

For a 200-foot driveway at 10 feet wide, common depths are 3 to 6 inches; at 4 inches this equals roughly 25 cubic yards or about 35 tons (using ~1.4 tons per cubic yard). With local material prices of $25 to $60 per ton, materials and delivery would typically run about $900 to $2,100 before any compaction or contractor labor. Measure your actual width and desired depth, and get a Hello Gravel quote to lock in local pricing and delivery details.

Twenty tons is roughly 14 to 15 cubic yards, which will cover about 1,100 sq ft at a 4u0022 depth or about 2,300 sq ft at a 2u0022 depth. For many residential driveways in Irwin County, 20 tons is enough to resurface a single-car driveway or build a short new driveway, but it may not be enough for long drives or deeper base builds. If you are unsure, use the Hello Gravel material calculator or request a quote with your exact dimensions.

A 20x20 driveway (400 sq ft) at 3u0022 depth requires about 3.7 cubic yards or roughly 5 to 6 tons of gravel, so material and delivery will often cost in the $150 to $400 range depending on the gravel type. Installed prices depend heavily on site prep, edging, and labor; basic delivery plus DIY spreading is inexpensive, while contractor installation including grading and compaction commonly brings total costs to $400 to $1,200. Ask Hello Gravel for material pricing and contact local contractors for installation quotes if you need spreading and compaction.

Crush-and-run (also called crush-and-drive or crusher run) delivered in a tri-axle load (about 10-12 tons) typically ranges from around $250 to $700 in the Irwin County area, depending on supplier and haul distance. Prices vary with seasonal demand and local supply, so requesting a Hello Gravel quote for your ZIP code gives the most accurate per-truckload price. Remember that loose material weight varies, so check whether quotes are by ton or cubic yard.

Many Irwin County suppliers quote gravel by the ton, though some offer cubic-yard pricing—both are common. Tons are easiest to compare for delivered loads and checkout on Hello Gravel, while cubic yards are useful when coordinating with excavators or measuring volume on-site. If you get mixed units, ask the supplier for the conversion (roughly 1.3 to 1.5 tons per cubic yard depending on material) so you order the right amount.

Yes, suppliers and contracted haulers deliver to rural Irwin County addresses, but accessibility and road conditions can affect whether a truck can safely dump at your location. Hello Gravel has a 3-ton minimum order and standard delivery lead time of 2+ business days, with a next-day option for orders placed before noon CST (additional fee may apply). Remote or tight-access deliveries may have extra fees or require a shorter truck; always note access details in your order notes and confirm with customer service if you have concerns.

Tailgate spreading by the driver is possible but not guaranteed and is done at the driver's discretion; Hello Gravel recommends requesting it at checkout but not relying on it for a full professional spread. Hiring a local contractor or small equipment operator to spread and compact a dump load typically costs $150 to $600+ in Irwin County depending on job size, labor rates, and whether heavy equipment is needed. For precise estimates, get a material-only quote from Hello Gravel and separate spreading/installation quotes from local contractors.