Fill Dirt in Dade County, GA

Prices for fill-dirt in Dade County typically vary based on quality and source. Expect a rough range of $30 to $80 per cubic yard for bulk fill-dirt delivered, though screened or engineered fill can cost more. Final price depends on supplier, delivery distance, and whether the material is clean (no roots/organic matter). Contact Hello Gravel for an exact quote for your zip code and quantity.

Locally in northwest Georgia, fill-dirt usually ranges from about $30 to $80 per cubic yard, or approximately $20 to $60 per ton depending on density. Regional factors, like local quarry sources and truck travel time to Dade County, influence the price. Use Hello Gravel's online calculator or get a quote to see exact per-yard and per-ton pricing for your address.

You can order bulk fill-dirt through Hello Gravel's online marketplace to connect with local suppliers and haulers serving Dade County. Some local landscape suppliers and small dirt yards also sell fill-dirt, but Hello Gravel streamlines quotes, delivery scheduling, and payment. For small quantities, big-box stores may sell bagged topsoil instead, but they are not practical for bulk filling projects.

Coverage depends on the truck size and the depth you need. A typical tri-axle dump truck carries about 10 to 14 cubic yards; at 8 inches (0.67 ft) depth, one truck (12 yd3) covers roughly 270 square feet. Confirm the truck's cubic yards when ordering and use Hello Gravel's calculator to convert depth and area into trucks or yards.

Generally yes: plain fill-dirt (unscreened subsoil) tends to be less expensive than decorative gravel or crushed stone. Gravel prices rise with stone size, screening, and color/grade, while raw fill-dirt is often lower-cost. Compare quotes for both materials through Hello Gravel to see local price differences for your project.

Most full-size pickup truck beds hold about 1 to 2 cubic yards of loose material depending on bed size and how high you load it. For safe transport and legal limits, one cubic yard will usually fit in a standard pickup, but you should avoid overloading. For bulk jobs in Dade County, delivery by dump truck is more efficient than multiple pickup trips.

Fill-dirt weight varies with moisture and composition, but a common estimate is about 2,000 to 2,700 pounds per cubic yard (roughly 1.0 to 1.35 tons per cubic yard). A 12-cubic-yard tri-axle dump truck in Dade County could therefore carry approximately 12 to 16 tons of fill-dirt. Your supplier can provide a more precise weight estimate based on the specific material they deliver.

An average delivered dump-truck load (about 10 to 14 cubic yards) in Dade County commonly runs between $300 and $1,000 depending on yard price, distance, and truck size. Factors that push cost higher include screened or engineered fill, long haul distances into the county, and jobs with difficult access or tight timing. Get an itemized quote from Hello Gravel to see what affects the price for your site.

Big-box stores sometimes sell bagged topsoil or small amounts of soil but generally do not carry bulk fill-dirt for large projects. For quantities larger than a few bags, Hello Gravel or local dirt suppliers are the practical option for bulk delivery. Ordering bulk through Hello Gravel saves time and avoids multiple trips to retail stores.

Yes, fill-dirt is commonly used to level low spots, build up grades, and backfill foundations, but it should be compacted in layers for stability. In hilly areas of Dade County, proper compaction and drainage are especially important to avoid settling or erosion. For structural needs or final landscaping top surfaces, you may want engineered fill or a layer of clean fill plus topsoil.

Spread fill-dirt in thin lifts of 4 to 6 inches and compact each layer with a plate compactor or roller to reduce future settling. For driveway bases, place compactable fill followed by a layer of compacted gravel for drainage and load-bearing. If you want tailgate spreading, request it at checkout but know drivers perform it only at their discretion for safety and access reasons.

Measure the area (length x width) and decide the fill depth, then multiply area by depth to get cubic feet and divide by 27 to convert to cubic yards. Example: 30 ft x 20 ft area at 6 inches deep = 30 x 20 x 0.5 = 300 cubic feet = about 11.1 cubic yards. Use Hello Gravel's online calculator or contact our team with your measurements for help and to factor in compaction and waste.