Gravel in Dacula, GA

Expect local prices to vary by type and delivery distance. Typical per-ton ranges in the Dacula area: crusher-run or #57 crushed stone $20-$40/ton, pea gravel $30-$50/ton, and river rock $60-$100/ton depending on size. Final price depends on haul distance, truck fees, and quantity; Hello Gravel shows exact pricing at checkout.

On Dacula's clay-heavy soils, angular crushed stone (crusher-run, #57, or 3/4u0022 crushed stone) performs best because it locks together and resists rutting. Round river rock and loose pea gravel tend to shift and sink on clay unless you build a proper base and edge. For driveways, use a compacted crusher-run base with a crushed-stone wearing layer.

Use these approximate ton ranges for Dacula projects (based on 1.3 tons per cubic yard): 1-car driveway (10'x20') 3-6 tons depending on depth; 2-car driveway (20'x24') 8-12 tons; parking pad (10'x20') 3-6 tons; patio (12'x12') with 2u0022 base 1-2 tons. These are ballpark figures; order a little extra for compaction, grading, and future settling.

Yes, installing a geotextile (weed barrier) and a compacted crusher-run base is recommended for Dacula to separate clay subsoil and improve drainage and stability. The fabric helps prevent mixing of clay and gravel while crusher-run provides a stable, compactable base. Contractors in Gwinnett County commonly use 4-6u0022 of compacted crusher-run under a 2-3u0022 crushed-stone wearing layer.

Permit requirements vary; Dacula and Gwinnett County may require permits for driveway changes that affect the right-of-way or stormwater connections. Many HOAs in the area restrict driveway materials or colors, so check your HOA covenants before ordering. Contact Gwinnett County permitting or your HOA for specific rules before starting work.

Gravel has a lower upfront material and installation cost than asphalt or concrete but requires more routine maintenance like regrading and topping up. In Dacula's wet clay soils, asphalt or concrete can be more durable long-term if the subbase is properly prepared, but they cost significantly more up front. Choose gravel for lower initial cost and easier repairs, and choose asphalt/concrete if you prefer low-maintenance paving and are willing to invest more initially.

Typical maintenance includes regrading and compacting once per year, spot replenishment of material every 1-3 years depending on traffic, and spring pre-emergent weed control. After heavy storms inspect for ruts and washouts and repair promptly by adding material and regrading. Keeping clear edges and proper drainage reduces how often you need to add gravel.

Yes, heavy West Georgia rains can wash gravel, especially on slopes and poorly drained clay soils. Local erosion controls that work well include installing firm edging (timber, concrete, or stone), creating a crowned or sloped driveway for runoff, adding French drains or culverts where necessary, and using geotextile fabric and a compacted base. For channels, use rip-rap or check dams to slow water before it reaches the gravel surface.

Installed costs vary by size and site prep; expect rough ranges of $1,000-$3,000 for a small 1-car driveway and $2,500-$7,000 for a typical 2-car driveway that needs grading and a compacted base. Simple material-only projects (delivery and DIY spreading) will be lower and depend on per-ton prices and haul fees. Get local quotes because site conditions, hauling distance, and contractor rates influence the final price.

Minimum orders vary by supplier, but Hello Gravel's minimum order is 3 tons and many local quarries have similar or larger minimums for truck deliveries. Suppliers often offer per-ton discounts for larger loads (10+ tons or full truckloads), and delivery fees are lower per ton on bigger orders. Use Hello Gravel to see available supplier pricing and typical delivery options in your zip code.

Drivers may be able to perform tailgate spreading at their discretion, but it is not guaranteed. Request tailgate spreading at checkout and the driver will assess safety and site access upon arrival. For consistent results, consider hiring local labor to grade and compact the material after delivery.

Measure the area (length x width) and decide the depth in inches, then convert to cubic yards (area in sq ft x depth in ft / 27) and multiply by about 1.3 to get tons. For example, a 200 sq ft area at 4u0022 depth is roughly 2.5 cubic yards or about 3.2 tons. Use Hello Gravel's material calculator or contact our team for help with exact estimates and to account for compaction and waste.