Fill Dirt in Blythe, GA

Prices in Blythe typically range based on supplier, delivery distance, and moisture content; expect roughly $10 to $35 per ton (about $15 to $45 per cubic yard) as a general range. Final price depends on your zip code, quantity, and whether delivery or hauling fees apply; use Hello Gravel to get an exact quote for your address and project. Remember our minimum order is 3 tons and regional variations (like West Georgia red clay) can affect price.

A ton of fill dirt is roughly 0.8 cubic yards (depending on moisture and compaction), which will cover about 260 sq ft at 1 inch depth. For different depths, scale linearly: at 2 inches it covers about 130 sq ft, and at 4 inches about 65 sq ft. For precise planning, measure area and use cubic yards = area (sq ft) * depth (in) / 324, then multiply by tons per cubic yard (about 1.2 to 1.5).

Most local tri-axle dump trucks used by our suppliers carry about 10 to 12 cubic yards, which translates to roughly 12 to 18 tons of fill dirt depending on moisture and material density. Local weight limits and wet Georgia clay can change the exact payload, so truckloads vary by supplier and site conditions. If you need a single truck quantity, tell us and we can match the right truck for your order.

At typical Blythe rates of about $15 to $45 per cubic yard, 100 cubic yards would generally cost between $1,500 and $4,500 before delivery fees. Final cost depends on supplier pricing, hauling distance, and any required spreading or permits. Contact Hello Gravel for a firm quote and to arrange delivery logistics for large orders.

To save money, order in bulk (larger loads lower the per-ton rate), schedule standard delivery windows rather than expedited service, and accept a local supplier’s regional material which reduces hauling. If you can pick up from a nearby yard, that often reduces cost compared with delivered service. Use Hello Gravel to compare local supplier quotes quickly and lock in transparent pricing.

Measure the area in square feet and decide the depth in inches, then use cubic yards = area * depth / 324. Convert to tons by multiplying cubic yards by about 1.2 to 1.5 tons per cubic yard (depending on wetness and compaction). If you prefer, use Hello Gravel’s material calculator or contact our team with your dimensions and we’ll help estimate quantities for Blythe projects.

Drivers may be able to perform tailgate spreading at their discretion and if conditions allow; request spreading at checkout so the driver is aware. This service is not guaranteed—drivers will assess safety and access on arrival—and additional fees may apply based on supplier policies. We recommend planning for offloading in a single pile and arranging separate spreading equipment if you need precise finish grades.

Clear a firm, accessible drop zone free of low branches, vehicles, and utility lines, and mark property limits and the preferred dump location with flags or stakes. Check for overhead wires and confirm truck turning access; soft or muddy ground in wet seasons in West Georgia may require plywood pads or an alternate drop spot. Communicate site conditions and access notes in your Hello Gravel order so the driver and supplier arrive prepared.

Because we source locally, fill dirt texture and color can vary in Blythe due to regional geology; if the material differs significantly from your expectations, contact Hello Gravel customer service promptly with photos and order details. We will work with the supplier to assess the issue and pursue a satisfactory resolution; see our site for the refund and claims process. Keep samples and avoid mixing large areas until the issue is documented.