Gravel in Atlanta, GA

Typical delivered gravel in the Atlanta area usually falls in a broad range depending on type and distance. Expect roughly $30 to $70 per ton and about $40 to $90 per cubic yard as a general estimate, but final price depends on stone type, delivery distance, truck access, and order size—check your zip code for an exact quote.

For Atlanta driveways, angular crushed stone (¾u0022 or #57) is generally best for load-bearing and compaction, while pea gravel is popular for appearance but can shift and wash out. Crushed stone with fines provides a more stable surface for cars; choose pea gravel only for low-traffic, decorative driveways and expect more maintenance.

A 20x10 ft patio (200 sq ft) at 2 inches deep needs about 1.2 cubic yards (roughly 1.7 tons) and at 3 inches needs about 1.85 cubic yards (roughly 2.6 tons). Because Hello Gravel has a 3-ton minimum order, you will typically order 3 tons and have a small leftover amount.

Hello Gravel connects you with local Atlanta suppliers and haulers, and most of our network enforces a 3-ton minimum order for residential deliveries. Contractor-sized loads and different supplier minimums are available in many parts of the metro area—enter your zip code to see options and exact minimums for your neighborhood.

Yes. Atlanta’s heavy rain and humidity can cause washouts, compaction loss, and weed growth if drainage is poor. Proper base preparation, sloping for runoff, and periodic maintenance reduce problems and extend the life of gravel surfaces in this climate.

On Atlanta’s clay soils, install a geotextile fabric, a 4–6 inch layer of larger crushed stone for the base, and a 2–3 inch surface layer of ¾u0022 or #57 stone, compacting each layer thoroughly. Good drainage, grading to shed water, and a well-compacted base are critical to prevent rutting and water retention in clay.

Gravel tends to be the most affordable initial option, often roughly $1 to $3 per sq ft installed for basic driveways; asphalt commonly runs $3 to $7 per sq ft and concrete $6 to $12 per sq ft, depending on local labor and site conditions. Gravel has lower upfront cost but may require more frequent maintenance over time.

In Atlanta, routine maintenance like raking, filling low spots, and adding 0.5–1 inch of stone every 2–3 years is common, with small repairs often costing $50 to a few hundred dollars. After heavy storms or major rutting, regrading and adding stone can cost more depending on the area affected; proactive drainage fixes reduce long-term costs.

Many Atlanta neighborhoods and HOAs have rules about driveway materials, appearance, and front-yard treatments, and some areas may require permits for changes to curb cuts or driveway aprons. Check your HOA guidelines and contact City of Atlanta zoning or public works before installation to confirm local requirements.

On slopes in Atlanta, use angular crushed stone with a well-compacted base, larger base rock (1–2 inches) and a coarse surface stone; combine with geotextile fabric, proper slope drainage, and erosion control measures like check dams or edging. Avoid smooth pea gravel on steep slopes because it tends to migrate and wash away.

Hello Gravel’s standard delivery window is 2+ business days, with next-day available for orders placed before noon CST at extra cost; exact lead times depend on local supplier schedules. Deliveries usually use tri-axle dump trucks—ensure a clear, level drop zone with 12–14 ft turning width, stable ground, and no overhead obstructions; request tailgate spreading at checkout but note drivers decide on-site if it is safe.

Basic professional installation in the Atlanta area commonly ranges from about $1.50 to $4.00 per sq ft, depending on site prep, slope, edging, and access. More complex jobs with drainage work, geotextile fabric, or heavy grading will increase costs, so get a local estimate for an accurate number.