Fill Dirt in Stuart, FL

Prices vary by supplier and load size, but in Stuart expect delivered fill dirt to typically range from about $10 to $30 per cubic yard (roughly $8 to $20 per ton). Exact price depends on local availability, truck type, and delivery distance; Hello Gravel requires a minimum order of 3 tons and can provide an exact delivered quote for your zip code.

Yes. Fill dirt usually costs less than topsoil because it has low organic matter and is used for raising grades rather than planting. If you plan to grow grass or plants on the surface, you should top with topsoil after using fill dirt.

Fill dirt is subsoil used to raise or level ground; it typically has low organic content and higher mineral or clay content. In Stuart and coastal Florida you may see sandier fills or shell fragments mixed in due to local geology, so expect some regional variation in texture and color.

A standard tri-axle dump truck often carries about 12 to 14 cubic yards loose (roughly 10 to 12 tons), though smaller trucks carry less. Hello Gravel coordinates local truck sizes and will confirm the expected load and price in your quote.

Physically, 1 cubic yard (27 cubic feet) can fit in many full-size pickups as a pile in the bed, but weight can exceed your truck's payload limit. Check your truck's payload rating before loading and consider a dump delivery if your truck would be overloaded.

One cubic yard equals a 3 ft x 3 ft x 3 ft pile (27 cubic feet). Spread thin, it covers about 324 sq ft at 1 inch depth, about 54 sq ft at 6 inches, and about 27 sq ft at 12 inches; plan for compaction which can reduce final volume.

Using typical local ranges, 20 cubic yards will likely cost between about $200 and $600 delivered, depending on supplier rates, truck fees, and any site access challenges. Request a Hello Gravel quote to get an exact total including delivery and any hauling surcharges.

Yes—fill dirt is appropriate for raising and leveling areas, but it should be placed in lifts (4 to 6 inches) and compacted between lifts to limit settling. In Stuart's sandy environment, plan for some settlement, address drainage so you don't create low spots, and finish planting areas with topsoil.

Because density varies, 1 ton of fill dirt is roughly 0.7 to 0.85 cubic yards. At 1 inch depth that equals about 227 to 275 sq ft; coverage falls with greater depth. Use cubic yards for planning and ask Hello Gravel to convert tons-to-yards for your specific material.

No. Fill dirt is not an ideal driveway base and 2 inches is insufficient for vehicular loads. For driveways you should use a compactable granular base (crusher run, aggregate base) of several inches compacted; consult a contractor for required thickness based on vehicle weight and local soils.

Ordering larger quantities lowers the per-yard price, and choosing standard (2+ business day) delivery instead of next-day reduces fees. Also select local suppliers through Hello Gravel to cut haul distance; we can show local options and up-front pricing to help you pick the most economical delivery.

Stuart's humid subtropical climate and sandy native soils mean fill dirt can settle, shift, or erode if not properly compacted and graded. Heavy rains make proper drainage, compaction in lifts, and erosion control important—plan for these site-specific conditions when placing fill.

Measure the area (length x width) and desired depth in feet, multiply to get cubic feet, then divide by 27 to convert to cubic yards (Length x Width x Depth) / 27. Add 10-20% extra for compaction and uneven ground, or use Hello Gravel's material calculator and request help from our team for a tailored estimate.