Stone in San Jose, FL

A typical tri-axle dump truck in the area holds about 10–14 cubic yards of stone (roughly 13–19 tons for crushed stone). Depending on stone type, availability, and delivery distance in San Jose, expect a full truckload to range widely—commonly about $400–$1,200 including delivery; specialty stone can cost more. Hello Gravel requires a 3-ton minimum and will provide a local, itemized quote based on your zip code and delivery window.

Ten cubic yards of crushed stone weighs about 13–14 tons (weights vary with stone size and moisture). In San Jose, a 10-yard load typically costs in the mid-range estimate of $500–$1,000, depending on stone type and any delivery or access fees; get an exact quote through our checkout by entering your zip code. Remember regional sourcing means color and texture can vary from photos.

One ton of crushed stone generally covers about 100–120 square feet at a 2-inch depth, about 50–60 square feet at 4 inches, and roughly 33–40 square feet at 6 inches. Actual coverage varies with stone size and how tightly it is compacted; flaky or angular stone will leave more voids than small, round stone. Use these figures as a starting point and use our material calculator for a precise quote.

Crushed stone with fines—often sold as crusher run, road base, or dense grade aggregate—compacts into a firm surface when mechanically compacted, making it a common choice for hard-driving surfaces. In San Jose's warm, humid, and sometimes rainy climate, proper compaction and drainage are critical; crushed stone can become very firm but it will not chemically cure like poured concrete. For a permanently hard, sealed surface consider concrete, asphalt, or adding polymer stabilizers to the stone and consult a contractor for local permitting rules.

For driveways, 3/4u0022 crushed stone with fines (crusher run) or a well-graded road base is a reliable choice because it compacts well and sheds water when graded. For walkways and patios, 3/8u0022 pea gravel or decomposed granite provides a finished look but requires edging and good base preparation in San Jose's sandy soils. Choose stone types based on use, drainage needs, and how much maintenance you want; our team can help match materials to your project.

Measure the area in square feet and choose your finished depth in inches, then use this formula: cubic yards = (area ft² * depth inches) / 324. To convert cubic yards to tons for crushed stone, multiply cubic yards by about 1.35 (regional variations apply). For example, a 500 ft² area at 2u0022 depth is about 3.09 cubic yards, or roughly 4.2 tons; you can also use Hello Gravel’s material calculator on the site for a fast quote.

Check access and ground firmness where the truck will stop—soft lawns, narrow gates, low-hanging wires, and tight driveways can affect where the driver can dump. Request tailgate spreading at checkout if you need it, but note drivers perform spreading at their discretion for safety; schedule deliveries sooner in dry seasons because heavy rain can slow hauling and compacting. If you have special placement needs, include clear notes in your order or call our team for guidance.