Gravel in Rosemont, FL

A standard tri-axle dump truck in the Florida region typically carries about 10 to 14 tons of gravel. Delivered cost depends on the gravel type and local supply, but expect roughly $35 to $60 per ton for common base gravels and up to $80+ per ton for decorative stone, so a truckload commonly runs about $350 to $1,000 delivered. Prices vary by season and material, and Hello Gravel requires a 3-ton minimum per order.

In the Rosemont/Florida region, common crushed gravel usually runs about $30 to $60 per ton delivered, while specialty or decorative gravels can cost $60 to $100+ per ton. Exact price depends on local supplier, material type, and delivery distance; use our checkout or get a quote to see site-specific pricing.

Florida prices follow the same local-supply patterns as Rosemont: common base and driveway gravels are generally on the lower end of the range, while decorative and imported stones cost more. Expect regional variation due to local geology, truck access, and seasonal demand—check your zip code on Hello Gravel for exact pricing in Rosemont.

Class 7 is a grading term that can vary by state, but it typically refers to a coarse crushed stone used for utility bedding, stabilizing fills, and some base work. In Rosemont projects it may be used under pavement or pipes, but confirm local spec names with your supplier since Florida suppliers may use different class labels.

Class 5 (often a crushed stone base with fines) is commonly used as a compacted base for driveways because it locks together and sheds water. Many Rosemont driveways use Class 5 as the base layer with a top layer of #57 or similar crushed stone for better drainage and traction.

#57 gravel is a 3/4-inch crushed stone that is angular and drains well. It is a common choice in Rosemont for driveway top layers, drainage trenches, and as an aggregate in concrete because it compacts but still allows water to pass through.

Coverage depends on depth. Using a common conversion (1 ton ≈ 0.7 cubic yards), one ton covers about 116 sq ft at 2u0022 depth, about 77 sq ft at 3u0022 depth, and about 58 sq ft at 4u0022 depth; therefore 20 tons will cover roughly 2,320 sq ft at 2u0022 depth, 1,540 sq ft at 3u0022 depth, or 1,160 sq ft at 4u0022 depth. Adjust for compaction and local stone density when planning your Rosemont driveway.

It depends on your truck's payload rating. One ton of gravel is roughly 0.7 cubic yards and can weigh about 2,000 to 3,000 lbs depending on the stone, so many full-size pickups can carry one ton but you must check your vehicle's payload capacity and local road weight limits. For safety and legal compliance in Rosemont, confirm your truck specs or order delivery from Hello Gravel.

For Rosemont driveways a common and practical choice is an angular crushed stone: Class 5 or crusher-run for the compacted base, topped with #57 or similar for a stable, well-draining surface. Choose higher-angular material for areas with traffic and consider local suppliers' recommendations because Florida's sandy soils and heavy rain favor materials that drain and lock together.

The least expensive options are usually locally sourced base materials like crusher run, screenings, or locally available road-base because they require less processing and transport. Cheap materials can be fine for sub-base work but may not perform as well as higher-quality crushed stone for a finished driveway surface, so weigh cost versus longevity for Rosemont's climate.

Cost depends on width and depth, but as an example a 20 ft long by 10 ft wide driveway at 3u0022 depth needs about 3 tons (Hello Gravel minimum). With common gravel prices of $30 to $60 per ton, material would be about $90 to $180 plus delivery and any spreading labor, so a basic installed project could start around $150 to $400 depending on material and site work.

One cubic yard of gravel covers about 162 sq ft at a 2u0022 depth, 108 sq ft at 3u0022 depth, and 81 sq ft at 4u0022 depth. Use these figures to estimate material for Rosemont projects and remember to account for compaction and irregular surfaces when ordering.

A tri-axle load (about 10 to 14 tons) of Class 5 in the Florida region typically costs in the range of $35 to $65 per ton delivered, so a truckload often runs from about $350 to $900. Final price depends on local supplier rates, availability, and delivery distance to Rosemont—get a quote on Hello Gravel for site-specific pricing.

Hourly labor rates vary by crew size and equipment; $100 per hour may be high for simple hand-spreading but reasonable for a crew with equipment like a skid steer or for skilled operators. For gravel projects in Rosemont, compare per-hour labor, equipment fees, and whether the price includes cleanup—Hello Gravel can arrange delivery and you can request spreading at checkout, but spreading is performed at the driver's discretion.