Fill Dirt in Riverview, FL

Delivered fill dirt in Riverview typically ranges from about $25 to $60 per cubic yard, all-in, depending on material quality, distance from the supplier, and whether the dirt is screened or engineered. Taxes, local hauling fees, and tight access (long driveways or offloading difficulties) can push costs toward the higher end. For a firm price, provide your Riverview address and desired quantity so Hello Gravel can quote local suppliers.

Yes, suppliers in the Riverview and Tampa Bay area commonly lower the per-yard price as order size increases, with noticeable breaks around 10, 20, and 50 cubic yards. Discounts vary by supplier but are often 10% to 25% for large loads; ask Hello Gravel for tiered pricing when you request a quote. Larger orders also reduce delivery cost per yard because fewer truck trips are needed.

Hello Gravel’s minimum order starts at 3 tons, and standard delivery lead time is 2+ business days with next-day available if ordered before noon CST for an extra fee. Many local deliveries in Riverview include free delivery from nearby suppliers, but fees of $25 to $150 can apply for longer hauls or restricted-access sites. Always confirm minimums, access requirements, and any additional handling fees when you request a quote.

Common truck sizes available to Riverview customers include single-axle dump trucks (about 8 to 10 cubic yards), tri-axle dump trucks (about 12 to 16 cubic yards), and larger belly-dump or tractor-trailer units (18 to 25+ cubic yards). Tri-axle trucks are the most commonly used for residential fill dirt deliveries because they balance capacity and neighborhood access. Tell Hello Gravel your site conditions and driveway access so we can match the right truck size.

Convert area to square feet (0.25 acre = 10,890 sq ft), multiply by depth in feet (6 inches = 0.5 ft) to get cubic feet (10,890 x 0.5 = 5,445 cu ft), then divide by 27 to convert to cubic yards (5,445 / 27 ≈ 202 cubic yards). Add 15% to 25% for settlement and compaction, so plan for roughly 232 to 253 cubic yards for best results. For site-specific guidance, send your property address and elevation goals to Hello Gravel for a more precise estimate.

Fill dirt is generally cheaper than screened topsoil and many decorative gravels and is best when you need to raise grade or fill large volumes where planting is not required. Choose topsoil when you plan to plant grass, gardens, or landscaping because it contains organic matter; choose gravel or crushed stone for driveway bases and drainage because they compact and shed water better than loose fill dirt. If you need both grade and a stable surface, a combination—fill dirt to raise grade then gravel or compacted base on top—is common in Riverview projects.

Yes, local suppliers typically offer a range: loose fill dirt (basic, lowest cost), screened or 'clean' fill (fewer rocks and debris, higher price), and engineered or structural fill (tested and compacted to specs, highest price). Screened fill is useful for finish grades where a smoother surface is needed, while engineered fill is required for structural work under foundations or retaining walls. Expect screened fill to cost roughly 10% to 30% more than basic fill and engineered fill to cost more depending on testing and compaction requirements.

Yes, large fills, grading, or any work in regulated floodplains and wetlands in Riverview may require permits from Hillsborough County or local planning departments, and many HOAs have rules about visible grading, driveway obstruction, and material placement. Before large deliveries, check with Hillsborough County Building/Development Services and your HOA for permit and staging rules, and tell Hello Gravel about any permit requirements so we can coordinate timing. Illegal dumping or placing material in drainage easements or wetlands can result in fines and mandatory removal.

Some Riverview suppliers and haulers can provide spreading and basic tailgate spreading at the driver’s discretion, but full spreading, grading, and compaction usually require a separate contractor or additional equipment. Professional spreading and compaction prices vary widely—budget roughly $75 to $200 per hour for small crews and machines, or $150 to $1,000+ flat depending on the project size and equipment needed. Request these services at checkout and ask Hello Gravel to connect you with local contractors for bundled pricing and scheduling.

Yes, Hello Gravel can provide firm, itemized quotes for specific quantities like 5, 10, 20, or 50 cubic yards delivered to your Riverview address; quotes will include material cost, delivery fees, and any known disposal or access charges. Prices depend on exact delivery address, site access, and whether you need screened or engineered fill, so share your address and any site notes to get an accurate quote. If your project may require permits or additional services, include that information so the quote reflects all expected costs.