Fill Dirt in Ridge Wood Heights, FL

In the Florida region around Ridge Wood Heights, delivered fill dirt typically ranges from about $10 to $30 per cubic yard depending on local source, moisture content, and delivery distance. Prices trend higher if the dirt is screened, needs import, or requires special handling. For an exact price for your address, get a quote through Hello Gravel.

Yes, fill dirt is generally cheaper than topsoil in Ridge Wood Heights because it is mostly subsoil with few organic materials, while topsoil contains compost and fines that add cost. Use fill dirt for bulk grading and raising elevations, and topsoil where you plan to plant lawns or gardens. If you need vegetation, plan to cap fill dirt with several inches of topsoil.

A common tri-axle dump truck used in the area usually carries about 10 to 12 cubic yards, which for fill dirt translates roughly to 12 to 18 tons depending on moisture and compaction. End-dump trucks can carry more volume and more weight, so exact tons vary by truck type and local hauling rules. Ask Hello Gravel for the truck type and estimated tonnage when you request a delivery.

A single truckload of fill dirt delivered to Ridge Wood Heights commonly costs between $200 and $700, driven by truck size, haul distance, and whether the material is screened or imported. Heavier loads and longer hauls push the price toward the upper end; local backhaul opportunities can lower costs. Request a specific truckload quote from Hello Gravel to know the price for your site.

Most local tri-axle dump trucks hold about 10 to 12 cubic yards of fill dirt, while larger end-dump trucks can hold 15 to 20+ cubic yards. Volume can change if the dirt is wet, compacted, or mixed with other materials, so use these numbers as a starting point. Hello Gravel can confirm the exact truck capacity when you place an order.

Fill dirt can settle over time if not properly compacted, which may affect grades and require additional material later. It usually has poor fertility and drainage compared with topsoil, so it is not suitable for planting without a topsoil layer, and high water table or sandy subsurface common in parts of Florida can make compaction and drainage more challenging. To reduce issues, use proper compaction, consider screened fill, and plan a topsoil cap where landscaping is intended.

Paying around $100 per hour for equipment rental plus operator or for a crew doing spreading and compaction can be reasonable in the Ridge Wood Heights area depending on crew size, machine type, and job complexity. Small jobs done by hand should cost much less, while using a skid steer or small excavator with compaction plate justifiably raises hourly rates. Get detailed estimates that break out labor, equipment, and disposal or import charges so you can compare bids.

Measure the area (length x width) and the depth of fill needed in feet, then multiply to get cubic feet and divide by 27 to get cubic yards; for a rough ton estimate, multiply cubic yards by 1.2 to 1.5 depending on moisture and soil type. Divide the total cubic yards by the truck capacity (typically 10 to 12 cubic yards for a tri-axle) to estimate truckloads. If you want, use Hello Gravel's material calculator or request a quote and we will estimate tons and truck counts for your address.