Fill Dirt in Richmond Heights, FL

Prices vary by supplier, haul distance, and moisture/density of the material. In Richmond Heights you should expect to get an exact delivered price by entering your zip code on Hello Gravel or requesting a quote, since local factors like high water table and hauling distance in South Florida affect cost. Minimum order is 3 tons, so quotes will reflect that minimum.

Tri-axle dump trucks we work with typically carry about 10 to 16 cubic yards of loose fill dirt (roughly 12 to 20 tons depending on soil density). Cost for a full truckload depends on material and distance; request a truckload quote on Hello Gravel for an accurate delivered price to Richmond Heights rather than relying on general estimates.

Hello Gravel's minimum order is 3 tons and deliveries are made by dump truck, so we do not generally offer pickup-bed-sized deliveries through our platform. If you need a smaller amount, consider local landscape supply retailers who sell bags or check our site for nearby suppliers who may offer smaller truck options.

Use fill dirt for raising grade and backfill where compaction and structural support are needed, and use crushed gravel (crusher run or base stone) for driveway base and drainage. In Richmond Heights' sandy soils and high water table, a crushed stone base with proper drainage is usually recommended for driveways, while clean fill dirt is better for leveling and building beds prior to landscaping.

One cubic yard equals 27 cubic feet and will cover roughly 108 square feet at 3 inches or about 162 square feet at 2 inches. One ton of fill dirt is typically about 0.7 to 0.9 cubic yards depending on density, so a ton will cover about 75 to 145 square feet at 2–3 inches; use cubic yards for the most accurate planning.

Total cost depends on delivery distance, site access, and how much compaction is required; Hello Gravel provides delivery pricing and local crews set spreading/compaction charges. As a rule of thumb, expect delivery to be quoted separately and spreading/compaction by a landscaper or contractor to be an additional charge—get two local bids and ask whether they include machine rental and compaction passes for a per-yard or per-hour cost.

Lower-cost alternatives include recycled fill (screened mixed fill), demolition fill, or blended subsoils; these materials can be cheaper but may contain debris, organics, or fines that affect compaction and permitability. In Richmond Heights you should weigh savings against potential settlement and local code or permit limits, and always ask suppliers for material descriptions and use recommendations before buying.

A typical wheelbarrow holds about 2 to 3 cubic feet, so one cubic yard (27 cubic feet) is roughly 9 to 14 wheelbarrow loads. Order by the cubic yard for accurate material estimates; choose a truckload if you need a large volume or want a single delivery—remember our minimum order is 3 tons, so small projects may still require a minimum purchase.

Yes, you can place fill dirt on top of existing grade without excavation to raise low areas, but skipping proper excavation, geotextile, or compaction can increase future settlement and maintenance in Richmond Heights' sandy, high-water-table soils. Installing without excavation lowers upfront labor and disposal costs but may require more material and future rework, so discuss the risks with a contractor before deciding.

Local rates vary; small landscape crews in the South Florida area commonly charge roughly $50 to $100 per hour for a two-person crew, while flat spreading rates can range widely based on access and compaction needs. Hello Gravel coordinates delivery and can help connect you with local suppliers and haulers, but bundled labor is handled by local contractors—ask our team for recommendations and get written estimates for spreading and compaction.