Gravel in portstjohn, FL

Typical delivered prices in West Florida vary by material and source: expect about $20 to $45 per ton for common crushed gravel, and about $30 to $60 per ton for pea gravel or decorative river rock. Per cubic yard, multiply by roughly 1.4 tons per cubic yard. Final price depends on type, quantity, and truck access; Hello Gravel requires a 3-ton minimum and may offer free delivery in many areas.

For Port St. John driveways we recommend angular, crushed stone (for example 3/4u0022 crushed stone or crusher run) because it locks together and resists rutting in sandy soils. Pea gravel and smooth river rock tend to shift and wash out during heavy rains, so they are better for decorative areas than primary driveways. Adding a compacted base layer and geotextile fabric improves performance in wet conditions.

Using typical driveway sizes (1-car = 10' x 20', 2-car = 20' x 20'), a 1-car driveway needs about 1.85 cubic yards (≈2.6 tons) at 3u0022 and 2.47 cubic yards (≈3.5 tons) at 4u0022. A 2-car driveway needs about 3.70 cubic yards (≈5.2 tons) at 3u0022 and 4.94 cubic yards (≈6.9 tons) at 4u0022. Always round up for compaction and future settling, and remember Hello Gravel has a 3-ton minimum order.

Regulations vary: Port St. John is in Brevard County and some unincorporated areas and HOAs have rules restricting loose rock, visible decorative rock, or certain colors and materials. Before ordering, check your HOA covenants and contact Brevard County zoning or building department to confirm any restrictions. If you have an HOA, provide material photos in your request notes to speed approvals.

Gravel itself is resistant to salt, but coastal salt spray does not damage stone; the bigger concern is storm-driven erosion and washout during heavy rains and hurricanes. Expect some displacement after major storms; edge restraints, proper grading, and stabilization measures reduce loss. After hurricanes you may need to top up or regrade gravel, especially on exposed slopes or beachfront properties.

Yes — in West Florida’s sandy soils and high-rain seasons, geotextile fabric and gravel paver grids significantly improve stability and drainage, reducing rutting and washout. Typical material costs run roughly $0.25 to $0.80 per square foot for geotextile fabric and $1.25 to $4.00 per square foot for paver/grid systems, with installation adding labor costs. Request these options at checkout or talk to our team to arrange supplier recommendations and installation estimates.

In Port St. John you can expect regular light maintenance: annual regrading and occasional top-ups are common, with heavier work after severe storms. Adding a few tons every 1 to 3 years is typical; material-only costs are often $30 to $60 per ton delivered, while professional regrading or repair will add labor costs. Using stabilization fabric and edge restraints can reduce frequency and long-term cost.

Gravel is usually the lowest upfront cost and provides excellent drainage, making it a good choice in flood-prone or sandy areas. Asphalt is more durable and smoother for vehicle traffic but costs more upfront and reduces permeability; pavers are the most expensive but offer aesthetics and longevity. For Port St. John, gravel plus stabilization is a practical, storm-resilient option when budget and drainage are priorities.

Most deliveries use tri-axle dump trucks and Hello Gravel has a 3-ton minimum, so if access is limited we can coordinate alternative drop-off points such as curbside or a nearby parking area. Smaller trucks or manual transfer options may be available from local suppliers but can increase cost; note that drivers will assess access on arrival and tailgate spreading is at their discretion. Contact our team ahead of delivery to discuss access, placement, and any spotting fees.

Use clean, washed angular stone such as 3/4u0022 crushed stone or #57 crushed rock for French drains and around foundations; these sizes allow good flow and resist clogging. Avoid fine fines or pea gravel directly against drainage pipes, and pair stone with geotextile fabric to keep silt out of the drain. For high water table areas, combine proper slope grading, perforated pipe, and coarse washed stone for reliable drainage performance.