Fill Dirt in Placid Lakes, FL

In Placid Lakes, fill-dirt typically ranges from about $20 to $45 per cubic yard delivered, depending on supplier, quantity, and whether material is screened or contains clay. Prices vary with demand and truck distance, so check your zip code and get a local quote for an exact price.

Yes—fill-dirt is usually less expensive per cubic yard than gravel because it is a simpler, less-processed material. Choose fill-dirt for raising grade or filling low spots, and gravel when you need drainage or a stable surface.

A cubic yard of fill-dirt in Florida typically weighs between about 1.2 and 1.5 tons, depending on moisture content and composition (sand vs clay). Weight affects delivery limits and truck load planning, so tell us the intended use when ordering.

Our typical tri-axle dump truck carries roughly 10 to 14 cubic yards of fill-dirt. For quick reference: one cubic yard covers about 324 sq ft at 1-inch depth, 81 sq ft at 4-inch depth, and 54 sq ft at 6-inch depth—multiply those by the truck yards to estimate coverage.

Truckload prices depend on truck size, distance, and total yards; in Placid Lakes expect a typical truckload to fall roughly between $350 and $1,000. For an accurate price, use our online quote tool or contact the Hello Gravel team with your address and quantity.

Most full-size pickups can carry about 1/2 to 1 cubic yard of loose fill-dirt, but the bigger limit is the truck's payload rating. Because fill-dirt is heavy, check your truck’s GVWR and avoid overloading—the safer option is to order delivery by dump truck.

Coverage per ton varies with material density, but one ton of fill-dirt is roughly 0.7 to 0.8 cubic yards. That will cover about 60 to 70 sq ft at 4-inch depth or about 250 sq ft at 1-inch depth; adjust based on how compacted you plan to make it.

"Poor man's concrete" usually means compacted aggregate or mixed dirt and gravel used instead of poured concrete for inexpensive hardening. Fill-dirt alone is not a substitute for concrete—if you need structural strength or long-term durability, use proper base aggregate or poured concrete and consult a contractor.

Yes—fill-dirt is commonly used to raise low areas and level yards, but in Placid Lakes you should consider our sandy soils and the high seasonal water table. Compact in lifts, allow for settlement, and use topsoil on the final few inches if you plan to grow grass or plants.

One cubic yard is 27 cubic feet; a typical wheelbarrow holds about 3 cubic feet, so a yard is roughly 9 wheelbarrow loads. This is a useful conversion for small DIY jobs or when planning labor.

Cost per dump truck load depends on how many cubic yards you need and delivery distance; most loads in the area fall in the $350 to $1,000 range. Get a precise price by entering your Placid Lakes zip code on our site or calling our team.

One cubic yard is a stack roughly 3 ft by 3 ft by 3 ft, so it looks like a small, compact pile that covers about 9 sq ft at 3 ft high. For larger jobs you’ll get obvious mounds; our delivery drivers can advise placement to minimize driveway or yard damage.

A 7x14 dump trailer will typically carry about 4 to 6 cubic yards of fill-dirt, depending on sidewall height and how high the material is piled. Check the trailer’s weight rating—fill-dirt is heavy and you don’t want to exceed legal or safe limits.

Yes—buying fill-dirt in bulk is usually more cost-effective per cubic yard than buying small bags. Remember Hello Gravel’s minimum order and delivery fees when comparing options, and factor in storage and spreading labor for large deliveries.

A tri-axle dump truck carrying 10 to 14 cubic yards of fill-dirt will typically hold about 12 to 20 tons, depending on the dirt’s moisture and composition. Local weight laws and site access can affect allowable loads, so we coordinate with suppliers to meet local rules.