Fill Dirt in Pinellas Park, FL

Fill dirt is subsoil used to raise or level ground; it has little organic matter and is meant for structural fill rather than planting. Local suppliers in Pinellas Park typically offer basic fill (unscreened subsoil), screened fill, and occasionally clay or sand-blended fill depending on local geology. Screened or engineered fill is more consistent and better for final grading, while straight fill dirt is usually the lowest-cost option.

Delivered prices vary by supplier, screening, compaction, and haul distance, but typical ranges in the West Florida area are about $12–$35 per cubic yard delivered. Smaller orders or special screening/compaction will push the price higher, while bulk orders (many yards) often reduce the per-yard cost. For an exact price for your address, request a quote with your zip code.

Yes, fill dirt is generally cheaper than topsoil because it lacks organic material and is intended for structural fill. Use fill dirt to raise grade or fill low spots, then finish with a 2–4 inch layer of topsoil if you plan to plant grass or landscaping. For grading that needs good plant growth, budget for both fill dirt and topsoil.

A typical tri-axle dump truck in this region carries about 10–12 cubic yards loose; delivered load prices for a single truck generally range from roughly $150–$400 depending on distance and material. If you need more precise pricing, request a delivery quote from Hello Gravel with your address and desired quantity. Remember delivery fees, screening, and spreading requests can change the total.

One cubic yard equals 27 cubic feet and roughly looks like a pile about 3 ft high by 3 ft wide by 3 ft long. A full-size pickup bed may hold about 1 to 2 cubic yards by volume but weight is the limiting factor — 1 cubic yard of fill dirt can weigh about 2,000–2,700 lbs, which can exceed a truck's payload. Always check your truck's payload rating before hauling loose fill; for safety and permits, bulk delivery by dump truck is usually recommended.

One cubic yard covers about 81 square feet at 4 inches deep and about 54 square feet at 6 inches deep. Use those numbers to estimate how many yards you need for your desired finished depth before compaction and settlement. Always order a little extra (about 5–10%) to account for compaction and uneven surfaces.

Example: to raise a 20 ft x 30 ft (600 sq ft) area by 2 inches you need about 3.7 cubic yards; raising the same area by 4 inches needs about 7.4 cubic yards, and by 6 inches about 11.1 cubic yards. For larger yards multiply area by desired depth (in feet) and divide by 27 to get cubic yards. For most backyard leveling jobs expect to order several cubic yards; call our team for help calculating your exact needs.

Yes — fill dirt is appropriate for raising and rough grading, but it is not a planting medium. Prep should include removing vegetation and loose organic material, correcting drainage, and placing fill in thin lifts (4–6 inches) with compaction between lifts using a plate compactor or roller. In West Florida's high water table and sandy soils, proper compaction and drainage are especially important to avoid future settlement or standing water.

Many local suppliers offer screened fill (fewer rocks and debris) and some provide compacted or engineered fill for a higher price. Screened and compacted fill costs more but provides better stability and less settlement, making it preferable for final grading, foundations, or near structures. When you need a smooth finish or structural support, opt for screened/compacted options and ask about test or engineering requirements.

Some suppliers and haulers can provide on-site estimates and tailgate spreading, but these services vary and are often offered at additional cost or at the driver's discretion. Hello Gravel coordinates with local suppliers and you can request spreading at checkout; the driver will assess whether it can be done safely on arrival. For guaranteed spreading or machine grading, hire a local landscaper or grading contractor.

Big-box stores usually sell bagged soil and sometimes offer bulk delivery of screened soils, but their minimums and per-yard pricing can make them less cost-effective for larger projects. For multi-yard orders, local suppliers coordinated through Hello Gravel typically offer better bulk pricing and truck delivery suited to landscaping and grading. Compare quotes, but for larger volumes we usually recommend bulk delivery from local aggregate suppliers.

Pinellas County and some local municipalities periodically run mulch or compost distribution programs and yard-waste services that can reduce landscaping costs. Program availability and schedules change, so check Pinellas County Solid Waste or the City of Pinellas Park website for current offerings. These programs can help with mulch and compost but usually do not supply fill dirt for grading projects.

Adding significant amounts of fill, changing grades, or altering drainage can require permits or approval from the City of Pinellas Park or Pinellas County, especially near wetlands, floodplains, or within setback areas. Contact Pinellas Park Development Services or the county before importing large volumes to confirm permit and erosion-control requirements. Always document grading plans and confirm allowed fill heights to avoid code issues.

Hello Gravel's minimum order is 3 tons and we deliver via contracted dump truck fleets, typically tri-axle trucks, with standard delivery in 2+ business days. Next-day delivery is available for orders placed before noon CST for an extra fee, and you can request tailgate spreading at checkout though the driver performs it at their discretion. For a quote, use our online calculator or contact our team at 855-241-8884.