Gravel in Perry, FL

Hello Gravel requires a 3-ton minimum order and uses dump trucks for delivery; standard delivery is 2+ business days and next-day service is available for orders placed before noon CST. Many local suppliers offer free delivery on standard orders, but delivery fees commonly range from about $25 to $125 depending on distance, load size, and access. Always check your zip code at checkout for exact pricing and pickup/delivery terms.

In the Perry area, crushed stone and #57 gravel are usually the most common and cost-effective options because they are produced regionally. Pea gravel is available but often costs a bit more, while river rock tends to be the least common and most expensive due to hauling. Availability and color/texture can vary by supplier, so check photos or add color notes at checkout.

Sandy soil and a relatively high water table mean less natural support and a higher risk of washout during heavy rains, so a simple loose layer of gravel will shift and rut faster here. To improve longevity, build a well-compacted base, use geotextile fabric to separate subgrade from stone, and provide good surface drainage and edging. Regular maintenance (regrading and topping) is also more important in Perry’s climate.

As a rule of thumb, 1 cubic yard of gravel is about 1.4 tons. For a 20x20 driveway: 4u0022 of gravel is about 5 cubic yards or roughly 7 tons; 6u0022 is about 8 cubic yards or roughly 11 tons. For a 10x50 (500 sq ft) pad: 4u0022 is about 6 cubic yards (about 8.5-9 tons) and 6u0022 is about 9 cubic yards (about 12.5 tons). Adjust depth for local soil conditions and planned use.

Permit requirements vary: Taylor County may not require a simple residential driveway resurfacing permit, but some work (grading, stormwater changes, curb cuts) can trigger permitting. Many HOAs have specific rules about surface materials and appearance, so check your HOA covenants before ordering. Contact Taylor County Building or your HOA for the definitive answer before starting work.

Local contractor pricing varies with site access, prep work, and material choice; ballpark installed costs in small Florida towns usually range from about $15 to $60 per ton (material plus delivery and spreading) or roughly $1 to $4 per square foot for basic installs. Extensive base preparation, drainage work, or edging will increase cost. Get at least two written local quotes and confirm exactly what each price includes.

Angular crushed stone (like #57) and larger base stones provide the best stability and drainage because the pieces lock together and allow water to pass through. A layered build-up—coarse base stone compacted below with a smaller, well-draining top layer—plus proper slope and drainage swales will perform best during heavy summer storms. Avoid using very fine, rounded gravels on driveways subject to traffic, as they tend to rut and wash away.

Gravel is typically the lowest upfront cost and easier to install yourself, but it requires regular maintenance such as grading and topping. Crushed shell can be attractive and is commonly used closer to the coast, but in inland Perry it may be harder to source and could cost more to deliver. Asphalt has a higher initial cost but is far lower maintenance over time and provides a smoother, more durable surface; each option has different long-term trade-offs, so compare quotes and expected maintenance before choosing.

Contractors in the area typically recommend excavating soft topsoil, then installing a woven or non-woven geotextile separation fabric to stop fines from migrating upward. Build a compacted base of 4u0022 to 6u0022 (or more on poor soils) of crushed stone, compact in lifts, then add a 1u0022 to 2u0022 running surface of smaller crushed stone if desired. Also include edge restraints, positive grading toward drains or swales, and consider culverts for low spots to prevent washout.

There are regional suppliers and quarries serving West Florida that deliver to Perry, and Hello Gravel will match you with local vendors once you enter your zip code. Many suppliers and haulers offer contractor or volume discounts for larger jobs (for example, orders over 10 to 20 tons), so ask for a contractor price or volume rate when you request a quote. If you need help finding bulk options, use Hello Gravel’s checkout to see local inventory and delivery pricing.