Gravel in Palm Beach, FL

Cost depends on gravel type, quantity, and delivery distance from local suppliers. In Palm Beach, expect a rough range of $30 to $70 per ton delivered, so a typical tri-axle load (about 10 to 15 tons) often runs between $300 and $1,050. Hello Gravel shows local supplier pricing during checkout and includes delivery scheduling and any extra fees. Contact our team for an exact quote for your ZIP code.

Quantity depends on depth: at 2 inches you need about 6.2 cubic yards (roughly 8.6 tons); at 3 inches you need about 9.3 cubic yards (roughly 13 tons). Using local Palm Beach pricing of about $30 to $70 per ton, delivered cost will commonly fall between $260 and $900 depending on depth and material. Use Hello Gravel's calculator or get a quote to see precise pricing for your address.

Coverage varies with depth and gravel type, but as a rule of thumb 1 ton covers about 100 to 120 sq ft at a 2-inch depth. For thicker applications (3 to 4 inches) that coverage drops proportionally. Always add 5-10% for settling and washout, especially in rainy Palm Beach conditions.

Two cubic yards is roughly 2.8 tons (1 cubic yard of gravel is about 1.4 tons). At typical Palm Beach delivered rates of $30 to $70 per ton, expect a delivered price in the neighborhood of $85 to $200, plus any small delivery fees or minimum-order adjustments. Hello Gravel requires a 3-ton minimum order, so pricing and availability will reflect that minimum.

Cost depends on width and depth; a 20 ft wide driveway at 20 ft long is 400 sq ft. At a common 3-inch depth you'd need about 3.7 cubic yards (about 5.2 tons); with Palm Beach delivered rates of $30 to $70 per ton, material cost typically ranges from about $160 to $365. Add any grading, compaction, edging, or hauling fees if needed, and ask Hello Gravel for a detailed quote and delivery scheduling.

Generally no for driveways that carry cars; 2 inches is usually too thin and may wash out in heavy rains or under vehicle traffic. For residential driveways in Palm Beach, plan on at least 3 inches for light use and 4 inches or more for heavier traffic, plus a compacted base and proper drainage. Consider local soil and rainfall—sandy subgrades and stormwater in Palm Beach make a sturdier base important.

Buying in bulk and ordering direct delivery from local suppliers is usually the most economical option. Use Hello Gravel to compare local supplier rates, meet the 3-ton minimum to avoid per-ton premiums, and schedule a tri-axle delivery to avoid multiple small trips. Avoid small bags from big-box stores unless you only need a few shovelfuls.

A common tri-axle dump truck carries roughly 10 to 15 cubic yards depending on local truck size and side heights. Spread at a 2-inch depth, that equals about 1,620 to 2,430 sq ft; at 3 inches it's about 1,080 to 1,620 sq ft. Actual truck size and load weight vary regionally, so Hello Gravel confirms the truck type and expected coverage when you order.

A standard wheelbarrow holds about 3 cubic feet. There are 27 cubic feet in a cubic yard, so 1 cubic yard equals roughly nine wheelbarrow loads. If you measure by tons, convert cubic yards to tons first (about 1.4 tons per cubic yard) then calculate wheelbarrow loads as needed.

Yes, many homeowners install gravel themselves for paths, patios, and small driveways. Proper prep includes grading, compacting a base, installing edging, and considering landscape fabric for weed control; clip-by-clip spreading and compaction are critical in Palm Beach because of sandy soils and heavy rain. If you prefer, request tailgate spreading at checkout but note drivers perform it at their discretion.

Gravel can last many years—often 10 to 20 years—before needing major replenishment, but local factors matter. In Palm Beach, heavy rains, storm runoff, and occasional hurricanes can cause washout and migration, so expect periodic top-ups or regrading after major storms. Regular maintenance like edging and topping up low spots will extend the service life.

Five tons of gravel is roughly 3.5 to 3.6 cubic yards, which spread at 2 inches covers about 580 to 600 sq ft. Visually, that's enough for a modest patio or a short section of driveway; if you want a thicker base or a wider area, you will need more. Use Hello Gravel's material calculator for a visual estimate based on your exact dimensions.

Capacity depends on side height, but a typical 7x14 dump trailer usually holds about 5 to 8 cubic yards of material. That converts to roughly 7 to 11 tons depending on gravel density and moisture content. If you plan to use a trailer instead of a tri-axle truck, confirm haul limits and weight allowances with the hauler and local regulations.

Coverage depends on depth: at 2 inches, 1 cubic yard covers about 162 sq ft, so 10 cubic yards covers roughly 1,620 sq ft. At 3 inches depth that same 10 cubic yards covers about 1,080 sq ft. When planning in Palm Beach, allow extra for settling and occasional washout from heavy rains.