Gravel in Osceola County, FL

A typical tri-axle dump truck carries about 10 to 12 tons of gravel. In Osceola County, price depends on material but expect roughly $30 to $75 per ton delivered, so a full load often runs between $300 and $900 plus any delivery fees. Exact cost varies by gravel type (crushed stone, shell, pea gravel), supplier inventory, and current demand—get a local quote for a firm price.

Prices in Osceola County vary by type and supplier, but a common range is about $30 to $75 per ton for most bulk gravels. Specialty products (decorative stone or washed shell) can be higher; always check the product type and get a quote through Hello Gravel to see local, up-to-date pricing.

Yes. Local suppliers serving Osceola County offer crushed rock, limestone-based mixes, and in some cases shell or decorative gravels sourced regionally. Because Florida has sandy native soils, many suppliers bring in or blend aggregates to meet driveway and landscaping needs—expect local color and texture variations.

Cost depends on the driveway length and depth. For example, a 20 ft wide by 40 ft long driveway (800 sq ft) at a 4u0022 finished depth needs about 13 to 15 tons of gravel; at $40 per ton that is roughly $520 to $600 for material plus delivery and compaction costs. Ask Hello Gravel for a quote with your exact dimensions to get a precise price.

Twenty tons of typical crushed gravel is roughly 14 to 15 cubic yards, which covers about 1,000 to 1,200 sq ft at a 4u0022 finished depth. Coverage changes with material density and whether you compact or leave a loose top layer, so measure your required depth and request a local coverage estimate when ordering.

Buying in bulk from a local supplier and arranging delivery is usually the most cost-effective route. Pick-up can save delivery fees if you have access to a suitable truck; combining orders with neighbors or ordering common local materials will also reduce per-ton costs. Use Hello Gravel to compare local supplier quotes and delivery options.

Rates vary by job scope: general laborers often charge less, while licensed contractors, heavy equipment operators, or crews that include hauling and compaction can charge $75 to $150 per hour. $100 per hour may be reasonable for specialized equipment work or complex site prep; always request itemized estimates and references before hiring.

One cubic yard equals 27 cubic feet and covers approximately 162 sq ft at 2u0022 depth, about 108 sq ft at 3u0022 depth, and about 81 sq ft at 4u0022 depth. Actual coverage depends on the gravel's shape and compaction—denser materials cover slightly less area—so use these figures as a guideline when calculating materials.

Coverage per ton depends on material density, but a good rule of thumb is that one ton covers roughly 100 to 120 sq ft at a 2u0022 depth. For deeper layers or heavier materials the coverage drops; check the supplier's density or ask Hello Gravel for a site-specific conversion.

Cost depends on finished depth. For 1,000 sq ft at 2u0022 depth you need about 6 to 8 tons; at 4u0022 depth you need about 12 to 16 tons. Using a typical range of $30 to $75 per ton, material cost would be roughly $240 to $1,200 plus delivery and any site prep or compaction fees—get a precise quote for exact numbers.

In Osceola County, a layered approach works best: a compacted base of larger, angular stone for stability, topped with 3/4u0022 crushed stone or crushed limestone for a stable, drainable surface. Consider geotextile fabric and edging to limit migration, and avoid very round gravels (like pure pea stone) on driveways because they move more under traffic and heavy rain.

Because Osceola County gets heavy seasonal rains and occasional tropical storms, loose or improperly installed gravel can wash or migrate. Prevent erosion by installing proper base material, compaction, edging, positive drainage (swales or French drains), and appropriate depth—ask your supplier or Hello Gravel for installation tips tailored to local conditions.