Gravel in Miami-Dade County, FL

In Miami-Dade County gravel commonly includes crushed limestone, crushed shell, river rock, and recycled concrete; materials reflect the coastal geology and local quarry sources. Texture and color can vary by supplier, so expect lighter, limestone tones and some shell content in many local mixes. If you need a specific look, add color or material preferences in Order Notes at checkout.

The most cost-effective approach is to buy in bulk (Hello Gravel minimum order is 3 tons) and choose locally sourced base or recycled materials like crushed concrete or road base. Use Hello Gravel to compare local suppliers and factor in delivery fees; picking a common local material and flexible delivery date usually lowers cost. Picking up the material yourself can save on delivery but requires a truck and time.

Prices vary by type, color, and distance, but expect roughly $20 to $60 per ton delivered for common gravels in Miami-Dade County. Specialty decorative gravels or washed stones are at the higher end of that range. For an exact price, enter your zip code at checkout to see local supplier rates and delivery options.

Cost depends on width and base depth; for a 20 ft long by 10 ft wide driveway (200 sq ft) at a 3u0022 compacted depth you would need about 1.9 cubic yards (roughly 2.6 tons). Using a typical local price of $25 to $50 per ton, material plus delivery is roughly $65 to $130, but expect higher total if you include subbase preparation and compaction by a contractor. Use Hello Gravel's calculator for a tailored material estimate and add contractor bids for installation costs.

Recycled crushed concrete and road base are usually the least expensive choices because they repurpose existing materials and are widely available. Standard pea gravel or basic crushed limestone tends to cost more, and decorative washed stones or colored gravels are pricier. Local availability affects price, so checking Hello Gravel listings for your zip code will show current low-cost options.

A typical tri-axle dump truck in our network carries about 10 to 12 tons of gravel. Expect a delivered truckload price somewhere in the range of $250 to $900 depending on material type, distance, and supplier. For exact pricing by truckload, request a quote for your zip code on Hello Gravel since rates vary by route and material.

One ton of gravel covers about 80 to 100 square feet at a 2u0022 depth, and about 50 to 60 square feet at a 3u0022 depth. Coverage depends on stone size and compaction; heavier, denser materials will cover slightly less area. For precise quantities, use Hello Gravel's material calculator with your desired depth and area.

Two inches is generally too thin for a driveway that will see vehicle traffic; it may be okay for a decorative path or a thin top dressing over a well-prepared base. For driveways, we recommend 3 to 4 inches of compacted gravel over a properly graded and compacted subbase, plus geotextile fabric where drainage or stability is a concern. Miami-Dade's rainy, coastal conditions make good drainage and compaction especially important to avoid washout.

At 2u0022 depth, 1,000 sq ft requires about 6.2 cubic yards (roughly 8.6 tons); at 3u0022 depth it needs about 9.3 cubic yards (roughly 13.0 tons). Using a material cost of $25 to $50 per ton, expect material-only costs roughly $215 to $650 depending on depth and stone type, not including delivery, site prep, or installation. For an exact quote, enter your zip code on Hello Gravel to see local supplier prices and delivery options.

Yes, many homeowners install gravel themselves. Key steps are: clear and grade the area, install and compact a subbase, lay geotextile fabric if needed, spread gravel to the correct depth, and compact it. If you want delivery assistance, request tailgate spreading at checkout (driver will decide on arrival) or hire a local contractor for spreading and compaction.

A 20x20 area is 400 sq ft. At a recommended 3u0022 compacted depth you'll need about 3.7 cubic yards (around 5.2 tons) of gravel; material costs at $25 to $50 per ton run roughly $130 to $260, plus delivery. Including site prep, geotextile, compaction, and labor, total installed costs commonly range higher, so get contractor bids and a material quote on Hello Gravel for exact local pricing.

Because Miami-Dade is coastal and flat, drainage, salt exposure, and washout from heavy rains should guide your choice of gravel and base. Coarser, angular crushed stone or limestone with good compaction properties and proper subbase work will resist movement better than very rounded river rock. Also expect color and shell content to vary by local supplier; note preferences in Order Notes and check delivered material before spreading.