Fill Dirt in Merritt Island, FL

Local retail prices vary by supplier and availability, but fill dirt in West Florida commonly runs roughly $18 to $45 per cubic yard. Final price depends on local supply, truckload size, moisture content, and whether delivery is included, so get a quote for an exact price.

Delivery charges vary by distance and truck size; many local suppliers and Hello Gravel offer free or low-cost delivery within nearby service areas, while longer hauls can add $50 to $150 or more. Typical dump trucks serving Merritt Island hold about 8 to 12 cubic yards (tri-axle), so ask for a delivered truckload price that includes the truck size and any offloading instructions.

Calculate area (length x width) and multiply by desired depth to find cubic yards: cubic yards = (sq ft x depth in feet) / 27. For example, a 20 ft long by 10 ft wide driveway (200 sq ft) at a 4-inch base needs about 2.5 cubic yards; at 6 inches it needs about 3.7 cubic yards. For backyard leveling, plug your yard dimensions and target depth into the same formula or use Hello Gravel’s material calculator for a quick estimate.

Yes, fill dirt is usually less expensive per cubic yard than decorative gravel or screened topsoil, because it is unprocessed and intended for bulk grade work. However, fill dirt is not a suitable finished surface for driveways or landscaping—compacted base material and a gravel or crushed stone surface are recommended for driveways.

On Merritt Island’s sandy coastal soils and spots with clay or organic layers, you should prepare the subgrade before placing gravel. Remove organic material, install a geotextile if needed, and add compacted fill or a structural base (crushed stone) before the wearing gravel; compaction is important due to the local high water table and occasional flooding.

Hello Gravel’s platform requires a minimum order of 3 tons, but most local dump trucks deliver full loads of roughly 8 to 12 cubic yards. Standard delivery lead time is 2+ business days, with next-day delivery sometimes available for orders placed before noon CST; contact our team for exact availability in Merritt Island.

One cubic yard (27 cubic feet) covers about 162 square feet at 2 inches, 81 square feet at 4 inches, and 54 square feet at 6 inches. Use these figures to estimate material for grading or base layers on Merritt Island projects.

A standard pickup truck bed typically holds about 0.5 to 1 cubic yard of loose fill dirt, depending on the truck and weight limits. For anything beyond a small patch or quick touch-up, order by dump truck to get adequate volume and safer, legal transport.

One cubic yard is 27 cubic feet; a common wheelbarrow carries roughly 3 to 4 cubic feet, so expect about 7 to 9 wheelbarrow loads per cubic yard. Use the lower number if your wheelbarrow is larger, and plan conservatively for labor time on Merritt Island’s sandy ground.

Yes, Brevard County and local municipalities have grading, stormwater, floodplain, and septic setback rules that can affect how much and where you can add fill on Merritt Island. For driveways and structural work, best practice is to meet compaction specs (often 90-95% of standard Proctor for engineered work) and check with the Brevard County Building and Zoning offices or a local engineer before substantial grading; also check HOA rules if applicable.

Schedule deliveries on dry days when possible, mark the desired dump location and call 811 to locate utilities before digging or grading. Add delivery notes (preferred drop spot, gate codes) at checkout, consider tailgate spreading if you want the driver to help (at their discretion), and contact Hello Gravel for a site-specific quote and local supplier recommendations.