Fill Dirt in Lake County, FL

In Lake County, delivered fill-dirt typically runs about $10 to $45 per cubic yard depending on source, hauling distance, and whether the dirt is screened. Prices can vary with seasonal demand and availability, so check your zip code for exact pricing and get a quote through Hello Gravel. Remember our minimum order is 3 tons and delivery fees or next-day charges can change the final cost.

Hello Gravel commonly uses tri-axle dump trucks that carry roughly 10 to 15 cubic yards of loose fill-dirt per load, which equals about 12 to 20 tons depending on moisture and composition. Smaller trucks and local haulers may carry less, so confirm the vehicle type when you get a quote. Volume, not just weight, is what matters for coverage, so ask your supplier for both figures.

Fill-dirt in Lake County generally weighs about 1.2 to 1.4 tons per cubic yard, depending on moisture content and whether it contains clay or shells. For quick estimates use 1.3 tons per cubic yard, but ask your supplier if you need a precise weight for permit or compaction calculations. Wet or clay-heavy material can weigh noticeably more than dry sandy fill.

Use this rule: 1 cubic yard covers about 324 sq ft at 1 inch depth, 108 sq ft at 3 inches, and 54 sq ft at 6 inches. One ton of fill-dirt (approximately 0.77 cubic yards) will cover roughly 250 sq ft at 1 inch, 83 sq ft at 3 inches, and 42 sq ft at 6 inches. These are estimates; compaction and settling will reduce final thickness, so order a little extra for grading projects.

Yes, fill-dirt is usually cheaper than screened topsoil because it is not amended, screened, or blended for planting. Fill-dirt is intended to raise grade or fill holes, not to support lawns or gardens, so if you plan to plant you may need to top with topsoil or compost. For pricing and the right material choice for your project, request both materials on Hello Gravel and compare quotes.

Most standard pickup beds hold about 0.5 to 1 cubic yard depending on bed length and whether you load above the bed rails, so a full cubic yard may overfill a typical pickup. If you plan to haul yourself, measure your bed and check weight limits; otherwise, order delivery from Hello Gravel (our minimum is 3 tons) to avoid overloading your vehicle. We can also match you with a local supplier who offers smaller loads if needed.

It depends on width and desired fill depth. For example, a 20 ft long by 10 ft wide driveway with a 4-inch base needs roughly 2.5 to 3 cubic yards (about 3 to 4 tons) of fill-dirt. Use the formula (length x width x depth in feet) / 27 to get cubic yards, and contact Hello Gravel if you want us to run the numbers based on your exact driveway dimensions.

Yes — fill-dirt is commonly used to raise grades and create a stable base before installing gravel, pavement, or turf, but it should be placed in layers and compacted. In Lake County, watch for poor drainage and high water table areas; improper placement can cause pooling or settlement. For landscaping, add a layer of topsoil over the fill-dirt before planting because fill-dirt lacks nutrients for plant growth.

A tri-axle load of 10 to 15 cubic yards will cover about 1,080 to 1,620 sq ft at a 3-inch depth and about 540 to 810 sq ft at a 6-inch depth. At a 1-inch depth the same load covers roughly 3,240 to 4,860 sq ft. Always confirm the truck size in your Hello Gravel quote and add 5-10% extra to allow for compaction and spreading losses.

Fill-dirt is not good for plant growth because it’s usually low in organic matter and nutrients, so you’ll need topsoil or compost for lawns and gardens. It can settle over time, especially if placed in large lifts without proper compaction, and it may change drainage patterns on your property. Also, because Lake County can be wet during the rainy season, expect slower settlement and potential erosion if you don’t stabilize slopes and control runoff.

Ordering bulk loads (tri-axle) from local suppliers and choosing standard delivery dates usually gives the best per-ton price. Use Hello Gravel to compare multiple local suppliers and schedule standard delivery instead of rush service to avoid extra fees. Consolidating other materials into the same delivery and ordering the right volume (not too little) keeps your per-unit cost down.

Clear the drop zone of debris, mark the preferred dump spot with flags or stakes, and note any overhead wires or narrow driveways that could block a tri-axle truck. In Lake County’s soft, rainy conditions, make sure access routes are firm enough for heavy trucks or arrange a different drop point; request tailgate spreading at checkout if you want the driver to help but understand it’s at their discretion. Contact Hello Gravel if you need guidance on access or staging.

Yes, large fills or changes in grade can trigger county permitting, especially near wetlands, flood zones, or drainage easements in Lake County. For projects that change lot grade, add fill near property lines, or alter stormwater flow, check with Lake County planning and zoning before placing material. If you’re unsure, Hello Gravel can help you get the right quantities while you verify permit requirements.

Contact Hello Gravel customer service as soon as possible and provide photos and order details so we can work with the supplier to resolve the issue. We will review the situation and follow our issue-resolution process, but specific remedies depend on the supplier and the order terms. Keep any order notes and delivery tickets handy when you call to speed up resolution.