Fill Dirt in Killearn Acres, FL

Delivered fill dirt in the Killearn Acres/Tallahassee area commonly ranges from about $12 to $30 per cubic yard, depending on screening, moisture, and distance. A tri-axle dump (around 10-12 cubic yards) typically runs about $150 to $350 delivered, while semi loads (about 20-25 cubic yards) commonly fall in the $300 to $700 range. Prices vary by supplier and seasonal demand, so get a few local quotes through Hello Gravel for the best estimate.

Most local deliveries use tri-axle dump trucks that hold roughly 10 to 12 cubic yards of loose fill dirt. Larger end-dump semis or belly-dumps carry about 20 to 25 cubic yards. Keep in mind Hello Gravel has a 3-ton minimum order and access or street restrictions in Killearn Acres can affect which truck your supplier can safely use.

Killearn Acres is served by local landscaping supply yards, dirt contractors, and construction material suppliers that offer bulk fill dirt and delivery. Availability of spreading varies: some suppliers or contractors offer paid spreading and compacting, while loader or tailgate spreading by drivers is sometimes provided at their discretion. Use Hello Gravel to view local suppliers, request spreading in Order Notes, and confirm any extra spreading or equipment fees before delivery.

Use this simple formula: cubic yards = (square feet x depth in inches) / 324. For example, to raise 1,000 sq ft by 2 inches: 1,000 x 2 / 324 = about 6.2 cubic yards. Add 10% to 20% extra for compaction, settlement, and waste when ordering to be safe.

One cubic yard covers about 162 sq ft at 2" depth, 81 sq ft at 4", and 54 sq ft at 6". Using an average density of about 1.3 tons per cubic yard, one ton covers roughly 125 sq ft at 2", 62 sq ft at 4", and 42 sq ft at 6". Round up and add 10% to 20% for compaction when ordering.

Use fill dirt to raise grades, backfill foundations, or build up areas where structural support is needed and plant growth is not a priority. Topsoil is better for lawns and gardens because it contains organic matter for plants, while gravel or crushed stone is the right choice for driveway bases and surfaces that need drainage and load-bearing capacity. In Killearn Acres, consider Florida's sandy native soils and local drainage conditions when choosing materials and consult a contractor for driveways or under-slab work.

Yes, many local suppliers offer screened (clean) fill dirt that has fewer roots and debris and is more consistent for use under slabs, in landscaping beds, or where reduced settlement is important. Screened fill usually costs more than raw or unprocessed fill, but it reduces the chance of future settling and organic decomposition that can cause sinkage—making it worth the extra cost for building pads or lawn-grade work. For large, non-structural fills where cost is the priority, raw fill may be acceptable but expect more settlement over time.

Expect Hello Gravel's minimum order of 3 tons as a baseline; many suppliers also set a cubic yard or truckload minimum. Additional fees you might see include fuel surcharges, offload charges for difficult drops, extra for tight-access deliveries, and weekend or next-day delivery fees. For very large or curbside deliveries, local permits or HOA rules may apply in Killearn Acres, and narrow streets or low-hanging wires can require a smaller truck or alternate drop location—confirm details before scheduling.

Labor and equipment costs vary by job size; expect local landscaper or crew rates often in the range of $40 to $90 per hour per worker, depending on crew size and experience. Contractors may charge $5 to $15 per cubic yard to spread and roughly $0.50 to $2.00 per square foot to fine-grade and compact, while equipment rental (plate compactor or small roller) can run $60 to $400 per day depending on the machine. For accurate pricing, get written estimates from local crews or include spreading requests in your Hello Gravel order notes.

Clear the drop area of vehicles, toys, and garden beds and mark any buried utilities (call 811) before delivery day. Make sure truck access is clear, measure turning radiuses, and note any HOA restrictions or driveway weight limits to your Hello Gravel order. If you want tailgate spreading, request it at checkout but be aware it is performed at the driver's discretion and is not guaranteed.