Fill Dirt in Jan Phyl Village, FL

Prices vary by supplier, but expect a typical delivered range of about $15 to $40 per cubic yard for fill-dirt in the Florida region. Factors that change the price include truck distance, moisture content, local availability, and whether you need spreading or special placement. For an exact price for Jan Phyl Village, use our online quote tool or contact our team for a local supplier estimate.

Yes, plain fill-dirt is generally less expensive than decorative gravel because it is a low-spec material used for raising grade rather than finished surfacing. However, costs depend on the type of gravel (e.g., crushed stone vs pea gravel), delivery distance, and required compaction. Choose fill-dirt when you need to build or raise grade; choose gravel when you need drainage or a finished walking surface.

Fill-dirt is dense, subsoil material used to raise or level ground, fill holes, or build engineered fills; it usually contains little organic matter. In Jan Phyl Village you would use fill-dirt for backfilling foundations, raising yard grade for proper drainage away from structures, or building up low spots before topsoil or sod. Avoid using it where you want plants to grow, since it lacks nutrients—cap with topsoil for landscaping.

Typical tri-axle dump trucks used on Hello Gravel routes carry about 10 to 12 cubic yards of loose material, while larger semi-dump trucks can carry 20 to 26 cubic yards. Because soil weight varies with moisture and compaction, one cubic yard of fill-dirt usually weighs about 1.1 to 1.4 tons. Check the truck type and yardage when you order so you get the quantity you expect.

Coverage depends on desired depth. As a rough guide, one cubic yard of loose fill-dirt will cover about 81 square feet at 1 inch deep, or about 27 square feet at 3 inches deep. Since one cubic yard is roughly 1.1–1.4 tons, plan using cubic yards for depth calculations and convert to tons for purchasing if needed.

Decide the depth you need first. For example, to raise 1,000 sq ft by 2 inches you will need roughly 6.2 cubic yards (1,000 x 2/12 / 27 = 6.17). Add 5–15% extra for compaction and settlement, then request a delivery quote—Hello Gravel can calculate exact yardage for your job.

Dump truck load prices depend on truck size, distance, and material. For the Florida region, a 10–12 cubic yard tri-axle load of fill-dirt typically falls into the lower- to mid-range per-yard rates multiplied by the truck volume; use our checkout to get a delivered truck-load price specific to Jan Phyl Village. Remember Hello Gravel has a minimum order (3 tons) and shows delivery timing and fees at checkout.

If your goal is inexpensive bulk fill without structural requirements, recycled or screened fill from construction cleanouts can sometimes be cheaper, but availability varies locally. For planting areas or lawns, using on-site subsoil plus a thin layer of purchased topsoil is often more cost-effective. Check local regulations and ask Hello Gravel about economical local fill options in the Jan Phyl Village area.

Permit requirements vary by project and location. Small yard fills usually do not require permits, but larger earthwork near wetlands, lakes, or drainage easements in Polk County may need permits or HOA approval. Contact Jan Phyl Village local authorities or Polk County permitting before major fills, and consult our team if you need supplier recommendations that meet local rules.

Use fill-dirt to raise grade, fill utility trenches, or create structural fills because it is stable and low in organic matter. Use topsoil where you plan to plant grass, flowers, or trees because it contains organic material and nutrients. In many projects you place fill-dirt first to set grades, then cap with several inches of topsoil for planting.

A semi end-dump typically carries about 20 to 26 cubic yards of loose fill-dirt; actual weight depends on moisture and compaction. In Florida soils this can translate to roughly 22 to 35 tons per semi load, but weights vary—local road and jobsite limits may apply. Ask for the expected yardage and truck type when ordering so your site can handle the delivery.

Drivers may be able to do tailgate spreading at their discretion, but Hello Gravel does not guarantee spreading services. Request spreading at checkout and note that the driver will assess whether it can be done safely on arrival. For larger or precise spreading work, consider hiring local landscapers or equipment with Hello Gravel’s delivered material.

Rates vary by crew size and task complexity; $100 per hour could be reasonable for a two-person crew with equipment for precise spread and compacting, but many basic labor-only jobs run lower. Get a local estimate that includes equipment charges if you need machinery (skid steer or small excavator) for faster, cleaner results. Hello Gravel can deliver to your site, and we recommend getting quotes from local contractors for spreading and compaction.

A 50-pound bag of fill-dirt is a very small amount—roughly equivalent to 0.02 cubic yards—so it will only cover a tiny patch a few square feet at shallow depth. Bulk delivery by the cubic yard is far more cost effective for yard-scale filling because delivery minimums and truck capacity favor bulk purchases. For Jan Phyl Village projects larger than a few square feet or inches of depth, order by the yard rather than bags.