Fill Dirt in Indian Shores, FL

A standard tri-axle dump truck holds about 10–12 cubic yards of loose fill dirt. In the Indian Shores area prices commonly run between about $30 and $80 per cubic yard, so a delivered truckload often falls in the $300–$960 range, depending on material type, hauling distance, and any permit or placement fees. Use Hello Gravel to get an exact local quote and schedule delivery.

Fill dirt is usually cheaper because it is unprocessed subsoil and requires less processing than gravel. However, final cost depends on local supply, hauling, and whether you need screening or rock-free material for your project.

One cubic yard is a 3 ft by 3 ft by 3 ft cube and will cover about 81 square feet at 1 inch deep. Weight varies with composition and moisture; in coastal Florida sandy fill often weighs roughly 1,200–2,400 pounds per cubic yard, so the tonnage can shift depending on the material.

Prices in Florida vary by region and material composition, but for Indian Shores expect local delivered fill dirt to commonly range from roughly $30–$80 per cubic yard. Hello Gravel provides local supplier quotes in checkout so you can see the exact price for your zip code and date.

For a 100 ft long by 10 ft wide driveway where you want to raise the base ~3 inches, you need about 9–10 cubic yards of fill dirt. Using the local price range of $30–$80 per cubic yard, the delivered fill dirt portion would be roughly $270–$800, not including gravel surfacing, compaction, or any drainage work.

Yes. Bulk fill dirt delivered by the truck is almost always less expensive per cubic yard than buying the same volume in bags. Hello Gravel requires a minimum (check your zip code) and delivery by dump truck, which is more cost-effective for most backyard and contractor jobs.

Volume depends on depth. For 1,000 sq ft: 1 inch deep = about 3.09 cubic yards; 2 inches = 6.17 cubic yards; 4 inches = 12.34 cubic yards. Multiply those volumes by local per-yard pricing to estimate cost and factor in compaction losses when ordering.

Yes, fill dirt is commonly used to raise and level low spots, but it should be placed in layers and compacted to prevent future settling. If you plan to grow lawn or plants, add a layer of topsoil (or amend the surface) because fill dirt lacks organic matter and nutrients.

Fill dirt is inexpensive but not suitable as a permanent driveway surface because it compacts poorly and can rut or erode in wet conditions. A better approach is to use fill dirt as a graded base, compact it, then install a pRoper base material like crusher run and a gravel or paved surface for durability.

A full cubic yard of loose fill dirt will physically fit into many full-size pickup beds, but weight and legal payload are the limiting factors. One cubic yard can weigh close to or over a ton depending on moisture, which may exceed your truck's payload rating, so a dump truck delivery is safer for larger amounts.

Not usually. Fresh fill dirt is often dense and low in organic matter, which is poor for sod establishment. Before laying sod, add several inches of topsoil or amend the surface, check grading and drainage, and allow the fill to settle and be compacted to avoid future low spots.

A 10-yard delivery is a common order size and will cost roughly 10 times the per-yard price. Using local ranges, a 10-yard truck in Indian Shores typically runs between about $300 and $800, though the final quote depends on the specific material, haul distance, access and any local permit or placement fees. Get an instant local quote through Hello Gravel to see exact pricing.