Fill Dirt in Hyde Park, FL

Prices vary with supplier, quality, moisture content, and delivery distance, but in the Florida Region a delivered cubic yard of basic fill dirt typically falls in the $25 to $55 range. Local supply, truck access, and any screening or hauling surcharges can push the price up or down, so check the exact cost at checkout for your Hyde Park zip code.

A single cubic yard of fill dirt in Hyde Park typically costs between $25 and $55 delivered, depending on whether it is screened, moist, or locally sourced. Larger orders and nearby suppliers can lower the per-yard price, while small loads or long hauls increase it.

Yes—plain fill dirt is generally cheaper than decorative gravel or crushed stone because it is less processed. However, if you need compaction, screening, or trucking over difficult access, those extra services can narrow the price gap.

Topsoil is rich in organic matter and used for lawns, gardens, and planting, while fill dirt is subsoil with little organic content used to raise grades and backfill foundations. Use topsoil where plants will grow and fill dirt where structural support or bulk elevation is needed.

Costs depend on truck size, distance, and supplier rates; a typical tri-axle dump truck (about 10 to 12 cubic yards loose) will generally cost several hundred dollars to a few thousand, including material and delivery. Hello Gravel shows exact truck options and total price at checkout for your address so you can compare loads and costs.

For foundation backfill, a common approach is to plan per-foot of depth: for example, backfilling 1 foot around a 10 ft by 10 ft footing needs about 8.3 cubic yards. For driveway base, 4 to 6 inches compacted over a 10 ft by 30 ft driveway is roughly 5.6 to 8.4 cubic yards; measure your area and depth and use the volume formula to get a precise number.

Hello Gravel has a minimum order of 3 tons, and delivery fees vary by supplier, distance, and local access conditions. Many Hyde Park customers see free or modest delivery fees, but the exact charge for your order is shown at checkout — contact our team if you need help interpreting the delivery estimate.

Some local suppliers offer screening, spreading, or compaction as add-on services, but availability varies by contractor and truck crew. You can request tailgate spreading at checkout, but drivers perform it only if it can be done safely; for guaranteed compaction, plan to hire a local contractor with compaction equipment.

Calculate cubic yards with: (area in square feet x depth in feet) / 27. Convert cubic yards to tons using an estimated weight of about 1.2 tons per cubic yard for fill dirt (range 1.1 to 1.4 tons/yd3 depending on moisture and composition) — for example, 5 cubic yards x 1.2 = about 6 tons.

One ton of fill dirt is roughly 0.8 to 0.9 cubic yards (about 22 to 24 cubic feet). That will cover about 270 sq ft at 1 inch deep, about 90 sq ft at 3 inches, or about 45 sq ft at 6 inches; adjust for compaction and settlement when planning.

Consider local soil conditions (sandy subsoil and a relatively high water table in parts of the Florida Region) and check for floodplain, permit, or HOA rules before raising grade. Also confirm truck access, drop location, and whether you want spreading or screening; add those notes at checkout or call our team for guidance.