Gravel in Haile Plantation, FL

Costs vary by gravel type and supplier, but in the Gainesville/Haile Plantation area expect delivered prices roughly in the range of $30 to $60 per ton for common gravels. A typical tri-axle dump truck carries about 10-12 cubic yards (roughly 12-18 tons depending on material), so a single truckload can run from about $360 to $1,080 before taxes and fees. Hello Gravel has a 3-ton minimum order and will provide a precise delivered price for your zip code and preferred material.

Coverage depends on truck size, driveway width, and depth. A tri-axle load of about 10-12 cubic yards (roughly 12-18 tons) will cover approximately 95–195 linear feet of a 10-foot-wide driveway at 4u0022 and 2u0022 depths respectively (4u0022 depth = about 97 ft, 2u0022 depth = about 195 ft using a 12 yd3 example). Ask Hello Gravel for a specific math estimate based on the truck capacity, material density, and the depth you want.

For 1,000 sq ft, the quantity depends on depth: at 2u0022 you need about 6.2 cubic yards (≈8.6 tons); at 4u0022 you need about 12.3 cubic yards (≈17.3 tons). Using a local price range of $30–$60 per ton, expect roughly $260–$520 for a 2u0022 layer and $520–$1,040 for a 4u0022 layer, plus any delivery fees and taxes. For an exact quote and to meet Hello Gravel's 3-ton minimum, enter your project details or contact our team.

'20-foot driveway' can mean different things, so clarify width and length. For example, a 20-foot-long by 10-foot-wide driveway is 200 sq ft: at 2u0022 depth that needs about 1.7 tons (but Hello Gravel's minimum is 3 tons), so you would typically order 3 tons and pay for that amount. Using $30–$60 per ton as a local range, material cost would be about $90–$180 for 3 tons, with delivery added as quoted at checkout.

Twenty tons is roughly 14.3 cubic yards (using a 1.4 tons/yd3 rule of thumb). That will cover about 2,314 sq ft at 2u0022 depth (roughly 231 linear feet of a 10-foot-wide driveway), about 1,157 sq ft at 4u0022 depth (about 116 linear feet of a 10-foot-wide driveway), or about 1,543 sq ft at 3u0022 depth. Actual coverage varies with material density and settling, so ask Hello Gravel for a tailored calculation for your surface and desired depth.

Materials in the Gainesville region can include shell fragments or occasional fossils because of Florida's geology, but most crushed stone and manufactured gravels do not contain intact shark teeth. If you want shell-based drives (crushed shells) or to avoid shells, specify your preference in Order Notes or ask our sales team; suppliers and material photos can vary by lot. Remember regional variation is normal, and Hello Gravel will connect you with local suppliers who can confirm typical composition.

Measure the area (length × width) in feet and decide the desired depth in inches. Convert: cubic yards = (area × depth_in_inches) / 324; then estimate tons = cubic_yards × 1.4 (common conversion for gravel). For example, a 500 sq ft area at 3u0022 needs about (500×3)/324 = 4.63 yd3 ≈ 6.5 tons. Use Hello Gravel's material calculator or contact our team for a quick check and to account for local material density.

Clear a safe drop zone free of low branches, parked cars, and underground utilities so the dump truck can access the area; Haile Plantation's neighborhood streets and HOA rules may affect where trucks can park. Mark the preferred drop location and note any gates or narrow drives in Order Notes; request tailgate spreading at checkout but know the driver will assess feasibility on arrival. For larger driveways consider a compacted base and geotextile fabric to improve drainage and reduce washout in Florida's heavy rains.