Fill Dirt in Golden Glades/The Woods, FL

In the Golden Glades/The Woods area, fill-dirt commonly runs in the range of about $15 to $45 per cubic yard delivered, depending on material quality, haul distance, and site access. A cubic yard of fill-dirt usually weighs about 1.3 to 1.5 tons, so you can expect roughly $20 to $70 per ton as a general delivered price range. Prices vary by supplier and season, so check your zip code on Hello Gravel for local quotes and minimum order requirements.

Per ton or per cubic yard, plain fill-dirt is often cheaper than crushed stone or gravel, but it serves a different purpose. Fill-dirt is good for raising grade and filling low spots, while gravel or crushed stone is the better choice for a stable driveway base or surface because it drains and compacts more predictably. For a driveway you will usually need fill-dirt to build up grade and then a gravel base layer on top for stability.

A typical tri-axle dump truck load in this region carries roughly 10 to 14 cubic yards of fill-dirt; using delivered prices this can land between about $150 and $700 per truckload. Final cost depends on exact yardage, the supplier, curb access, and whether the driver has to stage or spread material. Hello Gravel shows local supplier pricing and delivery options when you enter your zip code and offers next-day delivery for orders placed before noon CST for an added fee.

You can use fill-dirt to raise grade, build swales, or bring low areas up to match finished grade, but it is not a substitute for a structural base. Because Golden Glades has sandy soils and a relatively high water table, fill-dirt will compress and may shift unless properly compacted and free of organic matter. For stabilization or any area that needs to support vehicles, follow fill with a compacted gravel or crushed stone base and consult local building guidance if near foundations or drainage paths.

Using a common conversion (about 1.3 to 1.5 tons per cubic yard), one ton of fill-dirt is roughly 0.65 to 0.77 cubic yards. At 4 inches depth, one cubic yard covers about 81 sq ft, so one ton will cover roughly 50 to 65 sq ft at that depth. Coverage changes linearly with depth: at 2 inches, expect about 100 to 130 sq ft per ton; at 6 inches, about 33 to 44 sq ft per ton.

To raise 1,000 sq ft by 2 inches you need about 6.2 cubic yards (roughly 8 to 9 tons); by 4 inches about 12.4 cubic yards (roughly 16 to 19 tons); and by 6 inches about 18.5 cubic yards (roughly 24 to 28 tons). Using a delivered price range of $20 to $45 per cubic yard gives an approximate material cost of $125 to $280 for 2 inches, $250 to $560 for 4 inches, and $370 to $830 for 6 inches, not including any special site fees or spreading/compaction labor. Check Hello Gravel for exact local pricing and the minimum order (3 tons) before ordering.

For 1,000 sq ft, you need about 6.2 cubic yards for 2 inches and about 12.4 cubic yards for 4 inches. Delivery costs in the Golden Glades area vary: some local suppliers include free delivery for nearby jobs, while others charge $0 to $200+ depending on distance, truck size, and access; Hello Gravel will show the delivery fee once you enter your address and preferred date. Remember Hello Gravel has a 3-ton minimum and standard delivery takes 2+ business days unless you choose next-day service with an extra fee.

Hourly labor rates depend on the scope: for small local jobs, $75 to $125 per hour for a crew or tractor operator is common in South Florida, so $100/hour can be reasonable for professional labor doing hauling, spreading, and compaction. For larger deliveries, using a dump truck and driver is usually billed per load or flat delivery fee rather than by the hour; compare hourly labor to equipment rental and truck delivery to decide which is more cost effective. Always get written estimates that list what is included (spreading, compaction, debris removal) and check Hello Gravel delivery details to avoid double-charging.

Hello Gravel has a minimum order of 3 tons and uses local contract haulers, so check your zip code for supplier availability and delivery options. For permitting, Miami-Dade County or local municipalities may require permits if fill changes drainage, grade near wetlands, or affects flood elevation—always check with your local building or permitting office before large fills. Also consider site access: narrow driveways, overhead wires, or soft ground can require smaller trucks or extra staging charges, so include access notes in your order and communicate with the driver.

Ask suppliers for clean, non-organic fill-dirt or structural fill, free of topsoil, vegetation, and debris, and specify if you need compaction or testing. In Golden Glades' sandy, high-water-table environment, proper compaction in lifts (layers) and avoidance of organic material are key to reducing future settling and maintaining drainage. If the fill is near foundations or will support weight, request engineered or tested fill and consult a local contractor or engineer for compaction specifications.

Mixing local fill-dirt with cement (a crude soil-cement) is not recommended for structural or long-term use without compaction testing because Florida's sandy soils and seasonal moisture can cause poor strength and uneven performance. For small non-structural patches it may appear cheaper, but it can crack, wash out, or settle; using proper concrete or a crushed stone base is a more reliable low-cost approach. Always consult a contractor for load-bearing or drainage-sensitive applications before trying improvised mixes.