Fill Dirt in Girvin, FL

In the Girvin area, clean fill-dirt typically ranges from about $12 to $35 per cubic yard, depending on screening, clay content, and supplier availability. Prices vary with local supply, truck size, and delivery distance; request a quote for an exact price for your zip code.

Yes — for most basic grading and raising low spots, fill-dirt is usually cheaper than decorative gravel or crushed stone. Fill-dirt is a lower-cost material with little organic matter, while gravel has more processing and is priced higher.

In Florida's sandy conditions, one cubic yard of loose fill-dirt commonly weighs about 2,000 to 2,700 pounds (roughly 1.0 to 1.35 tons), depending on moisture and compaction. That range affects delivery limits and your truck payload, so check exact weights with your supplier.

Hello Gravel typically uses tri-axle dump trucks that generally carry about 10 to 14 cubic yards of loose fill-dirt per load, though truck capacity can vary by carrier. If you need a specific truck size or multiple drops, request that when ordering so we can coordinate with the hauler.

Multiply the per-yard price by the truck's capacity to estimate cost; for example, at $20 per cubic yard a 12-yard load would be about $240 plus any delivery or access fees. Final costs depend on the exact yard price, truck size, access constraints, and any local delivery charges.

Many full-size pickup beds can hold roughly 0.5 to 1.0 cubic yard if loaded level, sometimes a bit more if heaped, but weight is the limiting factor. Because 1 cubic yard of fill-dirt can weigh around 2,000 pounds, check your truck's payload rating and local load laws before hauling.

One cubic yard covers about 81 square feet at a 4-inch depth. Measure the area you want to raise, divide the square footage by 81, and add 5-10% for compaction and settling to estimate how many yards to order.

Fill-dirt is intended for filling and grading, not for planting — it usually has low organic matter and may compact tightly. For lawns or gardens, place several inches of quality topsoil or amended soil over the fill-dirt to support plant growth.

Yes — for significant elevation changes or structural work near foundations, local permitting and engineered fill/compaction may be required in Florida. For minor yard grading, compacting in lifts and good drainage practices help prevent settling, but check with your local building department for rules.

Materials reflect local geology, so Girvin fill-dirt may be sandier, contain shell fragments, or vary in color and texture from other areas. Hello Gravel sources regionally, so natural variation is normal; note any preferences in your Order Notes and contact customer service with concerns.