Fill Dirt in Gilchrist County, FL

Prices vary by supplier, moisture, and distance, but expect local delivered fill dirt to run roughly $12 to $35 per cubic yard in Gilchrist County. A typical tri-axle dump truck carries about 8 to 12 cubic yards, so a single truckload commonly costs about $100 to $420 delivered. Hello Gravel requires a minimum order of 3 tons and will show exact local pricing and delivery fees at checkout.

In Gilchrist County, a cubic yard of fill dirt generally falls between $12 and $35 delivered, depending on the source and how far it must be hauled. Prices change with seasonal demand and material moisture, so check our site for current local quotes and delivery options.

Yes, fill dirt is usually cheaper than screened topsoil because it is coarser and not intended for planting. Use fill dirt where you need to raise grade or build fills, and add a layer of topsoil on top if you plan to plant lawns or gardens.

Fill dirt is subsoil material used for building up low spots, creating berms, or raising foundations; it typically contains little organic matter. In Gilchrist County you’ll commonly see sandy to loamy fill that drains well, though local mixes can include small shell or limestone fragments depending on the supplier.

For a 20-ft by 50-ft driveway raised 4 inches, you need about 12 cubic yards of fill dirt (20 x 50 x 0.333 ft = ~333 cu ft = ~12.3 cu yd). At local prices of $12–$35 per cubic yard, expect the delivered fill-dirt portion to cost roughly $150 to $430, plus grading, compaction, and the gravel itself. Always compact in lifts and consider hiring local labor or requesting tailgate spreading at checkout; drivers may do light spreading at their discretion but it is not guaranteed.

A 7x14 dump trailer typically holds about 5 to 7 cubic yards of fill dirt depending on side height. Remember that fill dirt is heavy: a full trailer can easily exceed pickup payload limits, so check your vehicle ratings and local weight limits before hauling.

Weight varies with moisture, but 1 cubic yard of fill dirt is roughly 1.1 to 1.4 tons. At a 4-inch depth, 1 cubic yard covers about 81 sq ft, so 1 ton will usually cover around 60 to 75 sq ft at that depth. For exact coverage, calculate by converting desired area and depth to cubic yards and then to tons using your supplier’s density estimate.

Yes. Buying fill dirt in bulk is almost always cheaper per cubic yard than bagged material from big-box stores, especially for projects larger than a few yards. Hello Gravel connects you to local suppliers for bulk delivery and shows delivery costs so you can compare bagged versus bulk pricing easily.

You can use fill dirt to raise low spots, but it should be placed and compacted in layers to reduce future settling. If you plan to grow grass or plants, topdress with a few inches of topsoil; also be mindful of drainage and nearby wetlands—check Gilchrist County regulations for any permitting or fill restrictions on larger fills.

Use fill dirt when you need structural volume—raising grade, filling depressions, or supporting driveways and foundations—because it compacts well and is low in organics. Use topsoil where you plan to grow plants, lawns, or gardens since it contains organic matter and nutrients; a common approach in Gilchrist County is structural fill underneath with 3–6 inches of topsoil on top for planting.

Big-box stores sometimes sell bagged fill dirt or yard soil, but they rarely supply bulk truckloads for large projects. For bulk deliveries in Gilchrist County it’s usually faster and cheaper to order from local suppliers through Hello Gravel, which arranges truck delivery and shows local availability.

Using unsuitable fill dirt can lead to excessive settling, poor drainage, and nutrient-poor surfaces for planting. Contaminated or organic-rich fill can also decompose and sink over time, so always ask suppliers about material composition and consider compaction testing for larger fills.

Labor rates vary by crew size and task; basic labor for spreading and raking fill dirt in Gilchrist County often runs lower, while skilled operators with compactors or small machinery can command $50 to $100+ per hour. Get multiple quotes, confirm insurance and references, and compare the cost to renting equipment and doing the work yourself.