Fill Dirt in Fontainebleau, FL

Fill dirt is mostly subsoil used to raise or level ground; it contains little organic matter compared with topsoil. In Fontainebleau and the greater Miami-Dade area expect sandier mixes and a relatively high water table, which can affect settling and drainage. For structural projects, contractors often prefer engineered or compactable fill rather than loose topsoil.

Weight varies with moisture and composition, but in Fontainebleau a cubic yard of fill dirt typically weighs about 1.1 to 1.4 tons (roughly 2,200 to 2,800 pounds). Wet, clay-rich or heavily compacted material can weigh more, while very sandy dry material weighs less. Use volume (cubic yards) for ordering and expect tonnage to change with site conditions.

Local delivered prices in Fontainebleau commonly range from about $15 to $45 per cubic yard depending on material quality (clean fill vs mixed), distance from the supplier, and site-access challenges. Small orders and tight access can raise per-yard costs, while larger orders and simple drop locations lower them. The best way to get an exact price is to request a quote for your zip code through Hello Gravel.

Most tri-axle dump trucks we use typically carry about 10 to 12 cubic yards of loose fill dirt. Multiply that volume by the per-yard price to estimate cost; for example, at $25/yd3 a 10-yard load is roughly $250 plus any delivery fees. Hello Gravel lists minimum orders (3 tons) and will provide a delivered quote for your specific address in Fontainebleau.

One cubic yard equals 27 cubic feet and covers 324 square feet at 1 inch depth. So for common depths: 6 inches needs about 54 square feet per cubic yard, and 3 inches needs about 108 square feet per cubic yard. Because tonnage varies, convert your needed cubic yards into tons only after you know local fill density or ask Hello Gravel to provide both volume and weight estimates.

Coverage from 1 ton depends on material density, but using a typical fill-dirt density (about 1.2 tons per cubic yard), 1 ton is roughly 0.8 cubic yards. That will cover about 260 square feet at 1 inch depth, about 43 square feet at 6 inches, or about 86 square feet at 3 inches. These are approximate figures; measure your project and order by cubic yards when possible for better accuracy.

Hello Gravel connects you with local suppliers and hauling partners that serve Fontainebleau and Miami-Dade County. Enter your zip code on our site or contact our team to get matched with suppliers, get a delivered quote, and schedule a drop date. Regional sourcing means material types and appearance may vary depending on the local quarry or borrow site.

Buy by the cubic yard in larger quantities to lower per-yard cost, choose materials that suit your purpose (clean, uncompacted fill for structural work; mixed fill for simple grading), and minimize difficult access or tight drops that add truck time. Compare local supplier quotes via Hello Gravel and consider off-peak delivery dates to reduce hauling surcharges.

Drivers may be able to perform tailgate spreading at their discretion, but spreading and compaction are not guaranteed services. Request tailgate service at checkout and the driver will assess safety and site conditions upon arrival. For structural compaction or engineered fills, hire a contractor or equipment operator to compact in lifts to project specifications.

Standard Hello Gravel delivery requires 2+ business days, and next-day delivery is available for orders placed before noon CST for an additional fee. Exact availability depends on supplier stock and truck routing in the Miami area, so check your zip code on the site and select a preferred delivery date at checkout. We coordinate with local haulers to confirm timing once your order is placed.

Yes; Fontainebleau's sandy soils and high water table mean fill dirt can settle and affect surface drainage if not placed and compacted properly. Avoid using organic topsoil as structural fill, place fill in controlled lifts (commonly 4-6 inches) and compact each lift for better stability, and plan grading to direct water away from structures. For driveways or foundations, consult a contractor or engineer to determine if engineered fill or additional drainage measures are needed.