Fill Dirt in Flagler County, FL

Costs vary by supplier, truck size, and delivery distance, but in Flagler County expect roughly $15 to $40 per cubic yard delivered. A typical tri-axle dump truck carries about 8 to 12 cubic yards loose, so a single truck load usually costs around $120 to $480, not including any special fees for tight access or next-day delivery. Hello Gravel has a 3-ton minimum order and will show exact pricing for your zip code at checkout.

Delivered fill-dirt in Flagler County typically runs about $15 to $40 per cubic yard, depending on whether the dirt is screened, the moisture content, and how far it must be hauled. Local variations happen because supply comes from nearby pits and quarries, so use Hello Gravel's price quote for an exact delivered cost.

Yes, fill-dirt is generally cheaper than topsoil because it contains little or no organic matter and is used for raising grades or filling voids rather than planting. If you need to grow plants or seed turf on top, plan to add a layer of topsoil, which costs more per yard but is needed for healthy plant growth.

In our region, a common tri-axle dump truck holds about 8 to 12 cubic yards of loose fill-dirt, which typically weighs roughly 10 to 15 tons depending on moisture and soil type. Larger end-dumps or articulated trucks hold more, but material weight can change the tonnage considerably, so always confirm with your supplier if weight limits matter for your site.

One cubic yard equals 27 cubic feet. With a standard wheelbarrow holding about 3 cubic feet, one yard is roughly 9 wheelbarrows. If your wheelbarrow is larger or smaller, adjust the estimate accordingly.

Physically, one cubic yard can fit in some full-size pickup beds if the tailgate is down and the truck's payload capacity is sufficient. However, a cubic yard of fill-dirt can weigh 1,200 to 2,000 pounds depending on moisture, so check your truck's payload rating and local road or HOA restrictions before loading to avoid overloading.

Yes, buying fill-dirt in bulk is almost always cheaper per cubic yard than buying bagged material because you avoid packaging and handling costs. For reference, one cubic yard equals 27 one-cubic-foot bags, so buying 27 bags will usually cost substantially more than a single cubic yard delivered in bulk.

One cubic yard equals 27 cubic feet, which covers about 324 square feet at 1 inch depth, 162 square feet at 2 inches, and 108 square feet at 3 inches. Use those figures to estimate how many yards you need for your desired final grade.

It depends on the depth you want. For example, at 2 inches depth 1,000 sq ft requires about 6.2 cubic yards (1,000 x 2/12 = 166.7 cu ft = 6.17 cu yd); using local delivered prices of $15 to $40 per yard, expect material costs of roughly $93 to $248, plus delivery and any spreading or compaction charges.

A typical loose tri-axle load of fill-dirt in Flagler County is about 10 to 15 tons, depending on moisture content and soil composition. If you need precise tonnage for permits or truck weight limits, ask your supplier for weight estimates based on the specific material being delivered.

Yes. Untreated fill-dirt can settle over time, especially in Flagler County's sandy soils and high groundwater conditions, so expect some post-placement settlement. Fill-dirt is poor for growing plants without a topsoil layer, may require compaction and drainage work to avoid pooling, and must be clean fill to avoid contamination or permit issues for large fills.

Key factors are distance from the source pit, whether the dirt is screened or contains clay or debris, truck access at your site, and seasonal demand after storms. Local supply constraints after storms or during high construction activity can raise prices, so check Hello Gravel for real-time quotes and scheduling options.

Yes, compaction is usually recommended when you are building grades, driveways, or pads; it reduces future settlement and improves stability. In Flagler County, contractors often compact in lifts (small layers) and check moisture content to get the best density under sandy conditions.

For pure cost per cubic yard, fill-dirt is generally less expensive than most gravels, but they serve different purposes. Gravel provides immediate surface stability and drainage for driveways, while fill-dirt is used to raise grades or fill low spots and typically needs a gravel or paving layer on top for a driveway surface.