Fill Dirt in Englewood South, FL

Fill-dirt is subsoil material with low organic content used to raise or level ground. In Englewood South it is typically sandy with some clay pockets because of local geology, so it is good for filling low spots but not for planting without adding topsoil.

Prices vary by supplier and delivery distance, but bulk fill-dirt in the Florida region typically runs in a broad range. Expect approximate pricing and ask Hello Gravel for a local quote and delivery estimate for the most accurate cost.

Generally yes: plain fill-dirt is usually less expensive per cubic yard than crushed stone or gravel because it is a lower-processed subsoil. Costs depend on the exact material, delivery distance, and whether you need screened or engineered fill.

Weight varies with moisture and composition, but in Englewood South sandy fill-dirt usually weighs about 1.1 to 1.4 tons per cubic yard. Wet or compacted material will be toward the higher end of that range.

Hello Gravel typically coordinates tri-axle dump trucks from local haulers; a tri-axle load of fill-dirt in our area commonly runs about 10 to 12 tons (roughly 8 to 12 cubic yards depending on density). Larger commercial dump trucks can carry more, so confirm truck type when ordering.

Most full-size pickup boxes can carry about 1 to 1.5 cubic yards loose, so one cubic yard will usually fit. Check your truck's payload capacity first: one cubic yard of fill-dirt can weigh around 2,200 to 2,800 pounds and could exceed a smaller truck's safe load.

Yes, fill-dirt can be used to raise low spots and regrade a yard, but it should be placed in thin lifts and compacted to avoid future settlement. For planting beds or lawns add topsoil on the surface and check local grade, drainage, and any permit or HOA rules before changing elevations.

Use the rule: cubic yards = (square feet x depth in inches) / 324, then convert to tons. As a quick example, one ton of fill-dirt (about 0.77 to 0.8 cubic yards) will cover roughly 65 square feet at 4 inches of depth.

For 1,000 sq ft, common amounts are: about 6.2 cubic yards (≈8 tons) for 2 inches of fill, about 12.3 cubic yards (≈16 tons) for 4 inches, and about 18.5 cubic yards (≈24 tons) for 6 inches. Hello Gravel can calculate exact needs and round up for compaction and waste.

You may need permits if fill changes drainage, affects floodplains, or impacts wetlands; HOAs can also restrict grading. Check local county or city building and environmental rules before starting large fills, and consult Hello Gravel if you need guidance on typical local requirements.

Alternatives include engineered structural fill, compacted crushed stone or road base, washed sand, and geotextile-stabilized aggregate, depending on load and drainage needs. For planting or turf, a topsoil/fill mix may be a better choice than plain subsoil.

"Poor man's concrete" usually refers to compacted stone or sand used as a cheap base instead of poured concrete. Plain fill-dirt is not a substitute for concrete for structural uses; if you need a base for a patio or shed, use compacted crushed stone or an engineered base and follow local building requirements.

Place your order online and check availability by zip code; Hello Gravel requires a minimum order of 3 tons, offers standard delivery in 2+ business days, and next-day delivery if placed before noon CST for an extra fee. During checkout add delivery notes for access and request tailgate spreading (driver discretion applies).

Deliveries come from contracted dump trucks that will typically dump in the area you specify if site access allows; driver will assess safety and may decline hard-to-reach spots. Mark underground utilities and obstacles, expect a loose pile requiring spreading and compaction, and contact Hello Gravel for any access instructions or questions before delivery.