Gravel in Coral Gables, FL

A 20x20 ft area is 400 sq ft. At 2 inches deep you need about 2.5 cubic yards (≈3.5 tons); at 3 inches you need about 3.7 cubic yards (≈5.2 tons). With Hello Gravel's 3-ton minimum, expect to order 3–5 tons; material costs in Coral Gables typically range from about $40 to $100 per ton depending on type, so total material cost might be roughly $140 to $520, plus any delivery or spreading fees.

A full tri-axle dump truck usually carries roughly 10–14 tons of gravel. Delivered price depends on material type and supplier; expect a rough ballpark of $400 to $1,400 for a full truckload in the Coral Gables area. For an exact number, get a quote on Hello Gravel—prices vary with local supply, type, and any delivery fees.

For a long-lasting driveway in South Florida, many homeowners use a compactable base like limestone screenings or crushed stone with fines (3/4u0022 crushed stone or 'crusher run') topped with a larger wearing stone. These materials compact well and handle the region's sandy soils and rain. Delivered prices in Coral Gables typically run about $40–$80 per ton for common base and driveway stone; decorative pea gravel or specialty stone can be $60–$120 per ton.

Hello Gravel handles material sourcing and delivery but does not offer full driveway installation services beyond possible tailgate spreading at the driver's discretion. Full installation (base prep, fabric, grading, compaction, edging) is usually done by local contractors; expect installation quotes to vary widely based on scope, often $1,000 to $4,000 or more for a typical residential drive. We recommend getting multiple local contractor estimates and ordering materials through Hello Gravel for coordinated delivery.

Bulk delivery is usually the lowest cost per ton for most homeowners because it avoids bagging and retail markups, and Hello Gravel offers scheduled dump-truck delivery with regional pricing. Picking up loose gravel can be cheaper if you have a heavy-duty truck and time, but you’ll pay for fuel, time, and possible truck wear. Bagged gravel is easiest for small projects but is generally the most expensive per ton.

In Coral Gables' sandy soils and sometimes high water table, a geotextile fabric and a compactable base layer are highly recommended to reduce rutting, mixing with subsoil, and washout during heavy rain. Fabric costs are modest (often $0.20–$0.60 per sq ft installed) while adding a 2–4 inch base of screenings or crushed stone will increase material needs and cost by several hundred dollars depending on area size. A professional installer can advise the right fabric grade and base depth based on expected traffic and drainage.

For 1,000 sq ft at 2 inches deep you need about 6.2 cubic yards (≈8.6 tons); at 3 inches it's about 9.3 cubic yards (≈13.0 tons). Using typical Coral Gables price ranges of $40–$100 per ton, material cost would roughly be $344 to $1,300, plus delivery and any optional services. Remember Hello Gravel has a 3-ton minimum and delivery timing or fees may affect the final price.

Recycled concrete (crush and run), crushed shell, and decomposed granite can be cost-competitive alternatives depending on local availability; recycled concrete often runs slightly cheaper than new stone. Per-square-foot costs vary a lot with installation, but recycled base materials are commonly less expensive per ton than decorative stone; decomposed granite and shells are typically used for different aesthetics and drainage needs. Consider durability, maintenance, and local stormwater considerations when comparing alternatives.

DIY installation can save on labor costs but requires time, tools or rentals (plate compactor, rake, wheelbarrow) and knowledge of proper base prep and drainage. A professional quote normally includes site prep and grading, geotextile fabric, base material, compaction, edging, final stone, and cleanup; some contractors also handle permits or HOA requirements if needed. If you go DIY, Hello Gravel can deliver the materials to your site on a schedule that fits your project.