Fill Dirt in Campbell, FL

Prices for fill-dirt in Campbell vary by supplier, availability, and haul distance, but expect an approximate range of $10 to $35 per ton delivered. Hello Gravel requires a 3-ton minimum and offers standard delivery in 2+ business days, with next-day delivery available for orders placed before noon CST for an extra fee; check your zip code for local pricing and any free delivery promotions.

Fill-dirt density varies with moisture and composition, but a good rule of thumb is about 1.2 to 1.5 tons per cubic yard (use 1.3 tons/yd3 for estimates). For 1,000 sq ft: 4-inch depth needs ~12.3 cubic yards (~16 tons), 6-inch depth needs ~18.5 cubic yards (~24 tons), and 8-inch depth needs ~24.7 cubic yards (~32 tons).

Fill-dirt is appropriate for raising grade and backfilling in Campbell, but it is not usually the best final driving surface in sandy, high-rain areas. For driveways choose a well-graded, compactable base (crusher run or crushed stone) topped with a wearing surface; use fill-dirt to build or level the site, then install proper drainage and a compacted structural base where vehicles will travel.

Loose, fine-grained fill-dirt can erode or wash out in heavy storms if not protected. For better performance in Campbell, use well-compacted, coarse-grained fill near grades, install swales or French drains, and consider erosion controls (silt fence, vegetation, or mulch) on exposed slopes to reduce washout.

For Campbell, choose clean, low-organic fill that compacts well: 'select fill' or engineered fill is best for structural backfill and patio bases. Use coarser, sandy fill or crushed stone under driveways for drainage and strength, and reserve topsoil or loam for the final landscaping layer to support plants.

Fill-dirt is usually cheaper per ton but is less durable and drains worse than crushed limestone or crusher run. Crusher run and crushed stone form a stable, compacted base that handles traffic and rain better in Campbell, so spend more on those materials for the driveway surface and use fill-dirt primarily for raising and grading.

Regulations vary, but many Florida cities and counties require permits or notifications for large fills, grading that alters drainage, or when erosion control is needed. Check with Campbell city or the county building/permit department before ordering large quantities, and follow state or local environmental rules for stormwater and tree protection.

Hello Gravel connects Campbell homeowners with local suppliers and haulers in the region and displays supplier options and pricing at checkout. Most suppliers deliver by dump truck (tri-axle) and some local contractors or suppliers offer paid spreading and compaction, but tailgate spreading is only available at the driver's discretion; request those services in order notes and confirm availability before delivery.

Costs vary by scope, but expect equipment rental and labor ranges: a plate compactor rental $70-$150/day, skid-steer or small bobcat $300-$600/day, and labor or contractor minimums commonly $300-$1,200 depending on site prep and disposal. Get local quotes—Hello Gravel can connect you with suppliers, but for spreading and compaction you may need to hire a landscaper or excavation contractor who can give a firm estimate.

With proper compaction, drainage, and vegetation, fill-dirt used for grading and backfill can remain stable for many years, but loose or uncompacted fill may settle or erode within 1 to 3 years after heavy rains. For driveways, using a compacted aggregate base under the surface greatly reduces maintenance and the need for frequent replenishment.