Fill Dirt in Brevard County, FL

Fill dirt is subsoil with few organic materials used to raise grade, fill low spots, and build pads. In Brevard County it is commonly used for yard grading, filling driveways before paving, and creating level bases for sheds or pools where native sandy soils need added mass. It is not the same as topsoil and is chosen for volume and stability rather than planting.

Yes, fill dirt is generally cheaper than decorative gravel and topsoil because it is mined for bulk volume rather than screened for planting or aesthetics. In Brevard County you will typically pay less per cubic yard for fill dirt than for washed gravels or screened topsoil, though exact prices depend on supplier, delivery distance, and moisture content.

Prices vary by supplier and delivery, but in Brevard County fill dirt commonly ranges from about $15 to $35 per cubic yard delivered. Final price depends on local availability, moisture, hauling distance, and minimum-order rules; contact Hello Gravel for an exact quote to your zip code.

A common tri-axle dump truck used locally carries about 10 to 14 cubic yards of loose fill dirt, though some trucks hold a bit more. Weight limits and moisture can change capacity, so that volume typically equals roughly 11 to 18 tons depending on soil density and wetness.

A single truckload (tri-axle) of fill dirt in Brevard County often costs between about $300 and $700 delivered, depending on the cubic yards, road permits, and distance. For a precise price, request a quote through Hello Gravel—our checkout shows exact pricing based on supplier and delivery address.

For 1,000 sq ft at 3 inches deep you need about 9.3 cubic yards; at 6 inches you need about 18.5 cubic yards. Multiply those volumes by your delivered price per cubic yard to estimate cost, and keep in mind you may want 5-10% extra for settlement and compaction.

Coverage depends on depth and soil density, but a practical rule: one ton of fill dirt is roughly 0.8 to 0.9 cubic yards, so it will cover about 90 sq ft at a 3-inch depth. For other depths, scale proportionally (for example, about 180 sq ft at 1.5 inches or 45 sq ft at 6 inches).

Most full-size pickup beds will hold between 0.5 and 1.0 cubic yard of loose fill dirt, depending on bed size and how high you load it. Heavy loads can exceed the truck's payload rating, so for safety and legal weight limits, larger jobs should be delivered by a dump truck.

A standard wheelbarrow holds about 5 to 6 cubic feet, so one cubic yard (27 cubic feet) equals roughly 4 to 6 wheelbarrow loads. Expect about 4.5 loads on average, but exact count depends on your wheelbarrow size and how full you load it.

Cost per truckload varies by truck size and yardage; in Brevard County a typical tri-axle load of fill dirt usually runs between $300 and $700 delivered. If you need smaller loads, per-truck pricing may be lower volume but similar per-yard rates—get a tailored quote through Hello Gravel.

Yes for small grading and patch jobs you can install fill dirt yourself, but expect to rent equipment for compaction (plate compactors or a small roller) and to take safety precautions. For larger fills, steep slopes, or near wetlands and floodplains, hire a pro and check Brevard County permitting; improper placement can cause drainage and permitting issues.

No, fill dirt is not a substitute for concrete or engineered base material for structural slabs or driveways. It can be used to raise grade before installing a compacted engineered base or slab, but structural projects need proper base materials, compaction, and sometimes geotextile and engineering to meet local code.

A 7x14 bed with 2-foot sides has about 7.3 cubic yards by volume, but trailers are usually limited by weight capacity before you reach full volume. Because fill dirt weighs roughly 2,200 to 2,700 pounds per yard depending on moisture, a 7x14 trailer with a 7,000- to 10,000-pound GVWR will usually carry only 3 to 6 cubic yards safely—check your trailer's payload rating first.

You may need permits depending on fill volume, location, and proximity to wetlands or flood zones; large fills, changes to drainage, or work in regulated areas commonly require permits or engineering sign-off. Before placing large amounts of fill dirt, check with the Brevard County Building and Environmental departments or consult a local contractor to confirm requirements.