Fill Dirt in Blountstown, FL

Typical delivered prices for fill dirt in small West Florida towns like Blountstown vary by supplier, distance, and moisture content. Expect roughly $10 to $30 per cubic yard, or about $8 to $22 per ton as a general range; exact pricing depends on local availability and truck size. Hello Gravel has a 3-ton minimum and will show local supplier quotes and delivery fees when you check your zip code.

Local suppliers in the Blountstown/Calhoun County area typically include landscape supply yards, regional dirt/aggregate quarries, and construction material haulers. Some sell by the cubic yard, some by the ton, and some only by truckload (e.g., tri-axle); the unit depends on the supplier and the truck used. Use Hello Gravel to see which local suppliers are available and whether they price by ton, cubic yard, or truckload.

For driveways in sandy, high-water-table areas, use fill dirt only as a subgrade raise—follow with a well-draining base like crushed stone or crushed limestone for strength and drainage. For building pads, engineered structural fill or compacted sand/gravel is preferred over plain fill dirt to reduce settlement and wick-up from groundwater. For landscaping beds, screened fill dirt is fine for raising grade, but top with quality topsoil and provide drainage if your yard is seasonally wet.

Volume first: 1,000 sq ft raised 2 inches = about 6.2 cubic yards; 4 inches = about 12.4 cubic yards; 6 inches = about 18.5 cubic yards. Convert to tons using a typical estimate of 1.2 to 1.4 tons per cubic yard for fill dirt: roughly 7.5 to 8.7 tons for 2u0022, 15 to 17.5 tons for 4u0022, and 22 to 26 tons for 6u0022. Always order a little extra (5-10%) to allow for compaction and spreading losses.

Fill dirt will compact and provide structural mass, but it does not drain as well as coarse sand or crushed stone and can become saturated if the water table is high. In Blountstown's sandy soils and seasonal rain, plain fill dirt may hold moisture and lose supporting strength unless properly graded, compacted in lifts, or combined with drain layers and subdrains. For sites with high groundwater, plan for drainage measures or use free-draining material where load-bearing and drainage are critical.

Crushed limestone or crushed stone outperforms plain fill dirt as a driveway base: it drains better, compacts into a stronger load-bearing layer, and needs less frequent regrading. Fill dirt used alone will tend to rut, settle, and require more maintenance, so contractors usually place engineered base materials over raised fill before surfacing. For long-term low-maintenance driveways in this region, a compacted aggregate base with a surface course is the recommended approach.

Some local contractors include spreading and compaction in their bids, but many separate material delivery from site work—so confirm before ordering. If you plan to do it yourself, common rental equipment includes a plate compactor or roller for small areas, and a skid-steer or mini-excavator for spreading; larger jobs may need a vibratory roller and professional compaction testing. Hello Gravel offers optional tailgate spreading at checkout, but drivers perform it only at their discretion and it is not guaranteed.

Yes. Large fills, changes to lot grade, work near wetlands, floodplain areas, or changes affecting stormwater runoff can trigger county permits or erosion-control requirements in Calhoun County. Raising ground near septic systems, property lines, or in FEMA-designated flood zones may also require approval. Before ordering large volumes, check with the Calhoun County Building or Environmental office and include permit notes in your project planning.