Fill Dirt in Black Diamond, FL

Prices in Black Diamond typically vary with supplier, haul distance, and material quality. Expect roughly $20 to $45 per cubic yard delivered for basic fill dirt in the Florida region, though local supply and demand can push that number higher or lower. For an exact quote, check your zip code on Hello Gravel or contact our sales team.

Yes. Fill dirt is usually cheaper than screened topsoil because it contains less organic matter and requires less processing, making it a common choice for grading and raising ground. If you need to grow plants later, you may want to cap fill dirt with topsoil, which increases total cost.

Sometimes. Gravel offers better drainage and stability for structural backfill or around foundations and driveways, but it is not a substitute for fill dirt when you need to raise grade cheaply or when future planting is planned. Tell us your project details so we can recommend the right material for drainage, compaction, and landscaping needs.

Yes, fill dirt is commonly available across Florida and in the Black Diamond area through regional suppliers. Composition and texture vary by local geology, so you may see different color and particle characteristics than photos online. Availability can tighten during peak landscaping season, so order early for large jobs.

Hello Gravel uses tri-axle trucks that commonly carry about 12 to 14 cubic yards of material. As a rule of thumb, one cubic yard covers 324 square feet at 1 inch depth, so a 12-yard load covers about 3,888 sq ft at 1 inch or roughly 600–650 sq ft at a 6-inch depth. Exact coverage depends on how compacted you need the fill to be and local gradation of the soil.

A tri-axle dump truck load of fill dirt usually weighs between about 12 and 18 tons, depending on moisture content and material density. Local weight limits and how the supplier loads the truck will affect the final tonnage, so Hello Gravel will provide the expected weight on your order confirmation when available. Keep in mind wet or clayey soils weigh more than dry, sandy fill.

Cost varies with truck size, material price, and delivery distance, but a single tri-axle load (12–14 cubic yards) typically runs from roughly $300 to $800 delivered in our Florida service area. Extra charges such as long-haul fees, off-load difficulty, or next-day delivery will increase the price. Use Hello Gravel to get a precise delivered price for your address.

One ton of fill dirt in typical Florida soils is roughly 0.75 to 0.8 cubic yards, so it will cover about 250 square feet at a 1-inch depth. At a 6-inch depth, 1 ton covers roughly 40 to 45 square feet. These numbers change with moisture and compaction, so round up when ordering to allow for settling.

Fill dirt can settle over time, leading to uneven surfaces if it is not properly placed and compacted, and it lacks nutrients for planting since it contains little organic matter. It may also have variable clay or sand content depending on local sources, which affects drainage and compaction behavior. For planting beds or lawns you will likely need a top layer of screened topsoil or amended soil.

Delivery costs depend mainly on distance, driveway access, and any special off-loading needs; many orders in our network receive free delivery, but others may incur a fee of roughly $50 to $200. Next-day delivery and long-haul loads can cost more, and heavy or difficult drop locations may add surcharges. Check your zip code in the Hello Gravel checkout for the exact delivered price and any applicable fees.

Drivers may perform tailgate spreading at their discretion and if it is safe to do so; you should request spreading at checkout so the driver is aware. There are no guarantees—drivers will assess site conditions on arrival and may decline if spreading cannot be done safely or would risk property damage. If spreading is critical to your project, consider hiring a local landscaper to finish the work.

Measure the area (length x width) in feet and decide the depth in inches, then use this formula: cubic yards = (area sq ft x depth inches) / 324. For example, a 20 ft by 10 ft area at 6 inches depth needs about (200 x 6)/324 = 3.7 cubic yards. Use Hello Gravel's material calculator or contact our team for help and to account for compaction and settling.