Fill Dirt in Barrier Island, FL

Prices vary by supplier and access to the island, but expect roughly $15–$40 per cubic yard for the material plus $75–$350 for delivery on a tri-axle truck in Barrier Island areas. Tailgate spreading is charged separately (if available) and typically runs as a labor add-on; drivers may do light spreading at their discretion but spreading fees and availability depend on the local hauler and site access.

A typical tri-axle dump truck holds about 10–12 cubic yards of fill dirt, and delivered price to Barrier Island often falls in the $400–$1,200 range depending on material type, exact yardage, and island access fees (ferry, permits, narrow roads). For an accurate number enter your zip code or contact our team because local logistics and tide/bridge restrictions can change the final delivery charge.

If you mean a 20-foot long by 10-foot wide driveway and you want to raise it 4 inches, you need about 2.5 cubic yards of fill dirt (roughly 3.0–3.5 tons). Installation cost depends on site prep and compaction: expect labor and compaction to add several hundred dollars for a small job, while larger groundwork can run higher; get a local contractor quote for exact installation pricing.

On Barrier Island we recommend a geotextile (non-woven) separation fabric under fill dirt where soft or silty soils meet imported fill; this helps reduce mixing and settlement better than landscape fabric. Hello Gravel supplies the material but we do not install geotextile — hire a local contractor experienced with coastal soils to lay fabric and handle compaction.

Gravel can be used where drainage or structural support is needed, but for pure grade raising (to meet elevations or avoid ponding) cleaned fill dirt or engineered structural fill is usually preferred. Hello Gravel supplies and delivers both fill dirt and gravel, but we do not provide compaction or earthwork services — you should hire a local contractor with compaction equipment for long-term stability.

Solidifying untreated fill dirt into a concrete-like surface is not common; proper compaction and using engineered fill or a structural base are the typical methods to get a firm surface. There are polymer stabilizers and resin systems for gravel surfaces, but these are applied by specialty contractors — Hello Gravel does not apply stabilizers, though we can deliver compatible base materials.

To minimize weeds, start with clean fill dirt (free of organic topsoil), compact the base, install a geotextile barrier if appropriate, then add a clean top layer or mulch/gravel. Hello Gravel supplies clean fill and can deliver materials, but we do not install weed barriers or provide ongoing maintenance; a local landscaper can install fabric and recommend long-term weed control for coastal conditions.

Fill dirt is almost always sold by the cubic yard or ton — 1 cubic yard is 27 cubic feet and typically weighs about 2,200–2,600 lb (roughly 1.1–1.3 tons). A 50 lb bag is only about 0.02 cubic yards and is not practical for anything larger than a small patch, so if you need more than a few square feet of fill you should order bulk delivery (minimum order 3 tons).

Rates for local labor on Barrier Island vary with scope and season; $100/hour can be reasonable for skilled operators or specialized coastal work, but many contractors prefer fixed-price quotes for defined jobs like grading and compaction. Hello Gravel focuses on supplying and delivering materials and does not perform installation, but we can connect you with local contractors who provide firm quotes.

Delivered truck costs vary by yardage and site access, but a full truck of fill dirt to Barrier Island typically costs in the $400–$1,200 range; island-specific fees may raise that amount. You can request same-day delivery and spreading, but spreading is at the driver's discretion and depends on safety, access, and scheduling; next-day delivery options are available if ordered in time and may carry an extra fee.