Fill Dirt in Asbury Lake, FL

Fill-dirt is generally clean soil with few organic materials used to raise or reshape ground rather than support plant growth. In Asbury Lake, FL, use fill-dirt to level yards, build low berms, raise foundations above the high water table, or backfill around structures; avoid using it where you need topsoil for planting.

Fill-dirt is usually cheaper per cubic yard than decorative gravel because it is less processed. In Asbury Lake you will typically pay less for basic fill-dirt used to bulk up grade, while gravel costs more when it is washed or crushed for decorative or structural use.

Prices vary by supplier and seasonal demand, but typical fill-dirt in the Florida region around Asbury Lake runs roughly $12 to $30 per cubic yard. For an accurate quote for your address, check availability and delivery pricing on our site.

A cubic yard of fill-dirt in Florida commonly weighs about 2,000 to 2,500 lb (roughly 1 to 1.25 tons), depending on moisture and clay content. Using the yard price range above, expect a ballpark cost of about $10 to $30 per ton after converting by weight, but ask for a quote so you get exact pricing for your job.

Not usually. Gravel provides excellent drainage and a stable base but does not compact the same way as fill-dirt and is poor for areas where you plan to plant lawns or gardens. For structural fill or when burying utilities you may need engineered fill or compacted sand/gravel—check project requirements and local codes before substituting.

Most tri-axle dump trucks that serve our network typically carry about 10 to 14 cubic yards of loose material, which for fill-dirt translates to roughly 10 to 18 tons depending on moisture and soil type. Exact capacity depends on the truck and local weight limits; Hello Gravel lists the delivery size when you get a quote.

Cost depends on yard price, truck size, and delivery distance. As a rough example, a 10-yard load at $18/yd would be about $180 plus delivery; in Asbury Lake, typical full-truck deliveries of fill-dirt often fall between $150 and $500. Request a quote in checkout for a precise delivered price.

Calculate volume in cubic yards first: length x width x depth (in feet) ÷ 27. Convert to tons by multiplying cubic yards by the local soil weight (often ~1.0–1.25 tons per cubic yard in Florida). If you want help, use our material calculator or provide project dimensions and we can estimate for Asbury Lake conditions.

Many full-size pickup beds hold about 1 to 2 cubic yards loose, so one yard of fill-dirt will usually fit volumetrically. However, weight matters: one yard can weigh up to 2,500 lb and may exceed your truck's payload rating, so check your vehicle's payload before loading.

You can add small lifts of fill-dirt over lawn, but for larger raises we recommend removing organic topsoil first and placing fill in 4- to 6-inch lifts with compaction. In Asbury Lake's sandy/clayey soils, proper compaction and removing topsoil reduces future settling and drainage problems.

Compacted fill-dirt will firm up but it will never match concrete's strength or durability. In Asbury Lake, clayier fill can become quite stiff when compacted and dry, but for driveways or load-bearing surfaces you should use engineered base materials or pavement, not untreated fill-dirt alone.

Rates depend on whether work is manual labor or equipment-based. $100/hour can be reasonable for an operator running heavy equipment (skid steer or mini-excavator) with insurance; for unskilled labor, expect lower hourly rates. Get detailed bids that include labor, equipment, and cleanup so you can compare.

Possibly. Raising grade, changing drainage, or adding more than a small amount of fill may require local permits or HOA approval in Asbury Lake and Clay County. Check local building and stormwater rules before ordering large volumes to avoid rework or fines.