Fill Dirt in Arlingwood, FL

In the Florida region, delivered fill-dirt for Arlingwood projects typically runs in a broad range depending on supplier and site access; expect roughly $15 to $40 per cubic yard delivered as a starting point. Suppliers commonly offer volume discounts for full truckloads (often 10% to 20% off per-yard pricing) and better pricing for repeat or commercial accounts. Hello Gravel requires a 3-ton minimum order and will show exact pricing and any discounts for your zip code at checkout.

Most tri-axle dump trucks used in our network carry about 10 to 12 cubic yards of loose fill-dirt, while larger end-dumps or belly dumps can carry 12 to 16 cubic yards depending on local truck type and load rules. As a rule of thumb use about 1.2 tons per cubic yard for typical fill-dirt (so a 10 yd3 load equals roughly 12 tons). Ask Hello Gravel for the expected truck type and estimated cubic yards/tons on your specific order confirmation.

For general mass grading and backfill behind foundations, fill-dirt (clean, low-organic soil) is usually the right choice because it compacts and supports loads better than loose topsoil. Gravel is better when you need drainage or a stable base that resists frost or standing water; in humid Florida soils with a high water table you often combine both: compacted structural fill where strength is required and gravel where drainage is needed. If your project is structural (foundation, retaining walls, driveway base) consider an engineered specification—Hello Gravel can help you find local suppliers and typical materials used in the Arlingwood area.

Use this quick conversion: cubic yards = area (sq ft) x depth (in) / 324. For 1,000 sq ft that equals about 6.2 yd3 at 2", 9.3 yd3 at 3", and 12.4 yd3 at 4". Using roughly 1.2 tons per cubic yard, plan on about 7.4 tons at 2", 11.1 tons at 3", and 14.9 tons at 4" (round up to allow for compaction and minor settlement).

Fill-dirt is rarely sold in 50 lb bags for practical projects in Arlingwood; bulk delivery by the cubic yard or truckload is the normal approach because small bags are inefficient and expensive. For reference, a 50 lb bag of typical fill-dirt is roughly 0.02 cubic yards, so covering 1,000 sq ft at 2" would need about 290 to 300 bags. For projects that large, bulk delivery through Hello Gravel is almost always cheaper and faster.

No—native fill-dirt will not harden like concrete. For driveways or areas that need a firm, load-bearing surface in humid Florida soils, use a compactable crushed stone or graded base (often called crusher run, G-1/G-2, or stabilized base) and compact it with the correct thickness and compaction method. Hello Gravel can help you source the proper base materials locally; if you need a surfaced finish that behaves like concrete, consider concrete or a properly designed stabilized aggregate system rather than plain fill-dirt.

Hello Gravel shows delivered pricing for materials and many Arlingwood-area orders qualify for free or included delivery depending on supplier and order size; standard delivery lead time is 2+ business days with next-day options for orders placed before noon CST (additional fee applies). For placement and compaction, expect separate contractor charges: small jobs (spot deliveries or minor spreading) commonly run $100 to $400 total, while larger spread-and-compact jobs are often quoted per cubic yard or per hour and can range roughly $2 to $6 per cubic yard for labor plus equipment, depending on site access and complexity. Always request a combined materials-and-labor quote and disclose site constraints (gates, overhead wires, soft yard) so estimates reflect real conditions.

Cheaper alternatives include screened topsoil, recycled fill (demolition or municipal fill), and clean sand; these materials can be less expensive but have trade-offs. Screened topsoil and recycled fill may contain organic matter that settles or decomposes over time and are not recommended for structural backfill, while sand drains well but may not compact to the strength required for foundations. For grading that must support structures or pavements in Arlingwood's humid conditions, use clean, compactable fill specified by an engineer—Hello Gravel can connect you with local suppliers who list material descriptions so you can compare cost and suitability.

On arrival, inspect the load for visible roots, vegetation, trash, or excessive organic material—good fill-dirt should be free of large organics and reasonably consistent in texture. Do a simple pinch test for clay content and ask the supplier for a material description or source; for any structural or permit-driven work you may need a proctor or lab compaction test, which a local geotechnical engineer can perform. If you see unexpected material, contact Hello Gravel customer service promptly to document the issue and request next steps.