Fill-dirt in Chama, CO

Delivered prices in remote West Colorado (Chama area) vary with haul distance and truck access; expect roughly $35 to $80 per ton, or about $45 to $105 per cubic yard using a common conversion. These are ballpark ranges—actual price depends on local supplier rates, road difficulty, and any fuel or access surcharges. Contact Hello Gravel for an exact delivered quote to your property.

Hello Gravel connects you with local quarries and earthwork suppliers that serve the Chama area; minimum online orders start at 3 tons, but some suppliers or pits may prefer full truckloads (typically 9 to 20 tons depending on truck type). In mountainous West Colorado, suppliers commonly limit free delivery to a 25 to 75-mile radius; remote or steep sites often incur additional fees or require smaller truck/crew arrangements. If you need supplier names or pickup options, we can check availability for your zip code and provide specifics.

A good rule of thumb for typical fill-dirt is about 1.3 tons per cubic yard, though moisture and soil type can shift that between about 1.2 and 1.4 tons. Examples: a 12 ft by 40 ft driveway raised 4 inches is about 6 cubic yards (≈8 tons); a 20 ft by 20 ft garage pad raised 6 inches is about 20 cubic yards (≈26 tons); regrading a 1/4-acre yard by 3 inches is roughly 100 cubic yards (≈130 tons). Use Hello Gravel's material calculator for a precise estimate based on your exact dimensions and desired depth.

For Chama's freeze-thaw climate, use fill-dirt that is free of organic material and large debris, with moderate fines but good drainage; well-graded granular fills perform better than high-clay soils. Compact in uniform lifts (typically 6 to 8 inches loose) to at least 90% to 95% of standard Proctor density, and control moisture during compaction to reach target density. For structural work (building pads or load-bearing areas), consider engineered fill specified by a geotechnical report rather than loose fill-dirt alone.

Yes. Winter snow and spring thaw can limit access to remote Chama properties; some roads are seasonally closed or have traction and weight restrictions. Expect longer lead times in winter, possible need for smaller trucks or tracked equipment, and added fees for difficult access. When ordering, tell us about road grade, gates, and obstacles so we can confirm truck compatibility and any extra charges before scheduling.

Use fill-dirt for non-structural grading and filling low areas where load-bearing is not required. For driveways and base layers, crushed rock or crushed stone provides better drainage and stability; for building pads or areas supporting structures, engineered fill compacted to specification (often with geotech oversight) is the right choice. In freeze-thaw zones like Chama, prioritize drainage and compaction—consult a geotechnical engineer for foundations or where frost heave is a concern.

Contractor fees vary by project size and site difficulty; common charges include mobilization fees ($100 to $500), equipment/hours for spreading and grading ($75 to $200 per hour), and compaction (machine rental or crew time). Remote or steep Chama sites may add fuel or access surcharges and extra labor for handwork, which can increase total costs. Always get detailed line-item quotes and confirm whether Hello Gravel delivery includes tailgate spreading or if the contractor will handle placement and compaction.

Permit requirements depend on the type of work and exact location; small grading projects often need no special permit, but placement near streams, wetlands, or within certain setbacks can trigger county, state, or federal permitting. Road-hauling may require county road permits or weight restrictions, and disturbed soil may need erosion control measures. Check with your local building department and county road office, and let Hello Gravel know if your site is near sensitive areas so we can advise on common considerations.

We provide an online material calculator and can walk you through dimensions, desired finished grade, and the typical conversion for fill-dirt (≈1.3 tons per cubic yard). Tell us about access and project use and we will recommend quantity, arrange local supplier delivery, and offer options for spreading or contractor referrals if needed. Call 855-241-8884 or use the checkout notes to include special access instructions so we can confirm truck compatibility and a firm quote.