Fill Dirt in Ygnacio Valley, CA

Delivered fill-dirt prices in Ygnacio Valley vary by supplier, haul distance, and moisture content. Expect a rough range of $25 to $60 per cubic yard, or about $250 to $720 for a typical tri-axle load (10 to 12 cubic yards) delivered, though local rates may fall outside this range. For an exact price, check your zip code and get a quote through Hello Gravel.

For bulk yard fill and simple leveling, fill-dirt is usually the more economical choice in Ygnacio Valley because it is less processed than gravel. Gravel is often costlier but better for drainage, driveways, and areas that need to shed water during Northern California's winter rains. Choose fill-dirt for raising grades and gravel where surface stability and drainage matter.

You can use gravel instead of fill-dirt in situations that need drainage and stability, such as behind retaining walls or under slab subbases, but it is not ideal for establishing lawns or planting beds. For structural backfill or near foundations, follow engineering requirements—contractors often specify crushed rock or engineered fill rather than loose gravel. If your project is grading or yard-leveling, regular fill-dirt is usually the better choice.

Most local tri-axle dump trucks used by Hello Gravel carry about 10 to 12 cubic yards of loose material. For fill-dirt that converts to roughly 12 to 20 tons per load depending on moisture and compaction; a good rule of thumb is 1 cubic yard of fill-dirt equals about 1.2 to 1.6 tons. Note that smaller truckloads and different truck types are available if you only need the company minimum of 3 tons.

Hello Gravel’s minimum order is 3 tons and standard delivery lead time is 2 or more business days. Next-day delivery may be available for orders placed before noon CST for an additional fee, and many areas offer free delivery while remote or tight-access jobs may incur extra charges. If you need tailgate spreading, request it at checkout but understand the driver will determine if it can be done safely.

Clear the drop area of debris and mark the preferred dump location so the driver can see it on arrival. Make sure there is safe vehicle access and a 30 to 35 foot turning area for a tri-axle truck, protect paved surfaces if needed, and put any special instructions in your order notes. If your project needs compaction after delivery, plan to rent or hire a compactor, since loose fill-dirt will settle without compaction.

Use the simple conversion: 1 cubic yard covers about 324 square feet at a 1-inch depth. For example, raising a 1,000 square foot yard by 2 inches requires about 6.2 cubic yards of fill-dirt, which is roughly 7.5 to 10 tons depending on moisture. Use Hello Gravel's material calculator or contact our team to get a precise estimate for your site.