Gravel in Wilmington, CA

Delivered gravel prices in Wilmington vary by material, size, and supplier, but you can generally expect a range of roughly $35 to $80 per ton for common landscape and driveway gravels. Specialty stones, colored rock, or small-order delivery fees can push the price higher. For an exact price, get a quote on Hello Gravel—our estimates include delivery and reflect local sourcing.

The most cost-effective approach is to order the minimum bulk quantity (Hello Gravel minimum is 3 tons) during a standard delivery window and pick a common local material rather than a specialty stone. Make sure the delivery location is accessible for a tri-axle dump truck to avoid extra fees, and compare supplier quotes through Hello Gravel to find the best rate. Scheduling during normal business days and avoiding rush or next-day delivery reduces costs.

A 50 lb bag of gravel is about 0.5 cubic feet and covers roughly 6 square feet at a 1-inch depth. For a 10x10 (100 sq ft) area you would need about 34 bags for a 2-inch depth, 51 bags for 3 inches, and 68 bags for 4 inches. For larger jobs in Wilmington, ordering by the ton is usually cheaper and easier to deliver.

Products that harden gravel include polymeric binders, resin-bound gravel, and stabilized crusher-fines; they create a firm surface that resists displacement better than loose stone. These systems are sold and installed by specialty contractors and paving companies in the Los Angeles/Long Beach area, and availability in Wilmington is common but varies by supplier. Contact Hello Gravel to source the base material and ask for contractor referrals who supply and install stabilization binders.

A 10-yard load (about 270 cubic feet) of common landscape or driveway gravel typically ranges from about $400 to $1,200 delivered in Wilmington, depending on the stone type, supplier, access conditions, and any spreading or smaller-truck fees. Lighter, bulk aggregates toward the low end; specialty or colored stone toward the high end. Get a precise quote through Hello Gravel because local geology and haul distance influence price.

A 10-yard (270 cubic feet) load covers approximately 1,620 sq ft at 2 inches, 1,080 sq ft at 3 inches, and 810 sq ft at 4 inches. These are practical estimates for planning paths, patios, and larger landscape areas in Wilmington. Always allow a little extra for compaction and spreading losses.

For a driveway that sees regular vehicle traffic, 2 inches of loose gravel is generally not sufficient—it's more suitable for a surface topping over a properly prepared base. For driveways we recommend a structurally compacted base of 4 to 6 inches of compactable base material (crushed rock or crush-and-run) with a 1 to 2-inch wearing layer on top. Local soil, drainage, and load needs in Wilmington will affect final thickness, so consult with a contractor for heavier-use driveways.

Costs depend on driveway width, depth, base prep, and whether you want spreading or compaction included; for example, a typical 20 ft long by 10 ft wide driveway (200 sq ft) at a 4-inch compacted depth needs about 2.5 cubic yards (roughly 3 tons). Supplying that material may cost $150 to $500, and basic supply-and-spread installation could bring total costs to about $400 to $1,500 depending on labor, compaction, and site prep. For an accurate price, request a quote on Hello Gravel and specify installation needs and access conditions.

Lower-cost alternatives include crushed fines (crusher-run), recycled asphalt millings, decomposed granite, and locally available crushed rock; these can be less expensive and compact more firmly than loose decorative gravel. Availability in Wilmington depends on nearby quarries and recycling yards, and many local suppliers and haulers in our network carry these options. Use Hello Gravel to compare material types and prices for your ZIP code.

Yes—polymeric binders and resin or cement-based stabilizers can be applied to bind gravel into a firm, semi-rigid surface, and many contractors in the Long Beach/Wilmington area offer these services. Proper application usually requires a clean, graded subbase and specific gravel gradation, so material selection and site prep are critical. Hello Gravel can help you source compatible gravel and refer contractors who apply stabilizers.

You can pour concrete over an existing compacted base in some situations, but it usually requires removing loose top stone, ensuring a stable, well-compacted subbase, adding a leveling layer, and installing reinforcement as needed. Local concrete contractors in Wilmington commonly provide site prep, compaction, and base verification before pouring; poor prep can cause cracking or settlement. Ask Hello Gravel for material delivery to match your contractor's specs and get contractor referrals for full site prep and pouring.