Gravel in West Los Angeles, CA

Approximately 1 ton of typical crushed gravel will cover about 200–250 sq ft at a 1u0022 depth, about 100–125 sq ft at 2u0022, and roughly 65–85 sq ft at 3u0022. These are approximate values because stone density varies by type and local sourcing in West Los Angeles. If you need an exact amount for your project, use the cubic yard method or contact our team for a tailored calculation.

A 10x10 area is 100 sq ft. You would need about 0.31 cubic yards (≈0.4 tons) at 1u0022, 0.62 cubic yards (≈0.9 tons) at 2u0022, and 0.93 cubic yards (≈1.3 tons) at 3u0022, using common density assumptions. Note Hello Gravel minimum orders start at 3 tons, so small DIY jobs may need a larger order or bagged material.

A 20x20 patio is 400 sq ft. If you install a 4u0022 base plus a 2u0022 gravel surface you may need roughly 10–12 tons of material; material-only cost in West Los Angeles commonly ranges from about $40–$120 per ton delivered depending on material and supplier, so expect roughly $400–$1,400 for materials delivered. Labor, compaction, edging, and any permits or grading are additional; contact Hello Gravel for a local quote and available delivery windows.

A typical tri-axle dump truck carries roughly 8–12 cubic yards (about 10–14 tons) depending on material and truck. At 2u0022 depth that equals roughly 1,250–1,750 sq ft of coverage; at 3u0022 depth it covers less accordingly. Hello Gravel coordinates local truck delivery and can confirm exact truck sizes, load weights, and price for your delivery address.

Rounded gravel (pea gravel) is sometimes slightly cheaper per ton than crushed stone, but crushed stone (angular, like 3/4u0022 crushed) performs better for driveways because it compacts and locks together, reducing rutting. For driveways we usually recommend a compacted road base (crush-and-run) topped with crushed stone for long-term performance. Costs and availability vary locally, so check options available in West Los Angeles through Hello Gravel.

For very small quantities (a few bags), buying prebagged material at a big-box store is convenient but expensive per ton. For projects needing several cubic yards, bulk delivery is almost always cheaper per ton, but Hello Gravel has a 3-ton minimum; if you need less than that consider splitting an order with a neighbor or visiting a local landscape yard for a small pickup. Always compare per-ton delivered prices versus bagged cost to decide what saves you money.

Pricing for 100 cubic yards depends on material type, local supplier rates, and hauling distance. As a rough ballpark, delivered costs can range from about $3,000 to $12,000 for 100 cubic yards depending on those factors, but that range is wide—request a site-specific quote for an accurate price. Large orders may also require coordination for truck access and staging in West Los Angeles.

One cubic yard equals 27 cubic feet. With a common wheelbarrow volume of about 3 cubic feet, that is roughly 9 wheelbarrow loads per cubic yard. Actual counts vary by wheelbarrow size and how full you load each trip, so expect 7–11 trips in practice.

For the base layer we recommend crush-and-run or road base (compacted aggregate) to provide structural support and drainage. For the surface, 3/4u0022 crushed stone, small crushed rock, or decomposed granite are popular in West Los Angeles—crushed stone gives better traction and durability, while decomposed granite provides a finer, more natural look. Consider local climate, HOA rules, and driveway slope when choosing materials; Hello Gravel can connect you with local suppliers to compare options.

Costs vary with driveway width, base prep, and local labor. As an example, a 200-ft long by 10-ft wide driveway (2,000 sq ft) with a 4u0022 compacted base plus a 2u0022 gravel surface requires roughly 35–45 cubic yards (≈50–65 tons) of material; material-only delivered might range from about $1,500–$6,000 in West Los Angeles depending on material selection. When you add excavation, grading, compaction, edging, and labor, total installed cost commonly ranges widely—often around $20–$60 per linear foot for simple installs—so get a site-specific estimate from Hello Gravel or a local contractor.