Gravel in Sunbow, CA

Expect a wide range depending on material and delivery: commonly about $45 to $85 per ton for typical landscaping or crushed stone in the California region. Recycled or pit-run materials are usually toward the low end and decorative or specialty stones toward the high end. Final price depends on your zip code, minimum order (3 tons), and any delivery or next-day fees—get a quote on the Hello Gravel site for an exact amount.

One cubic yard is 27 cubic feet and will cover about 108 sq ft at 3 inches depth, about 81 sq ft at 4 inches, and about 54 sq ft at 6 inches. Weight varies by material (roughly 1.2–1.6 tons per cubic yard in our region), so if you need tons instead of yards check the specific material density or use Hello Gravel’s calculator to convert. For driveways we commonly recommend 3–4 inches for a top layer and 4–6 inches for the compacted base depending on traffic.

57 gravel (often called 3/4u0022 crushed stone) is larger than 67 and is a common choice for driveway bases because it compacts well and drains. 67 is a smaller, finer mix often used as a bedding or top layer and for filling gaps. For most Sunbow driveways, a 57 base with a finer topping or a well-graded crusher run gives the best balance of stability and drainage.

Common options near Sunbow include 3/4u0022 crushed stone (57), crusher run (well-graded mix), decomposed granite (DG), pea gravel, river rock, and recycled crushed concrete. For driveways, 3/4u0022 crushed stone or crusher run is usually best for the base because it compacts and drains well; decomposed granite can work for low-traffic or decorative drives but may need stabilization. Colors and texture vary regionally, so request photos or samples if color is important.

A tri-axle dump truck commonly used for Hello Gravel deliveries typically carries roughly 10–14 cubic yards of material, which converts to about 12–20 tons depending on the material density. Cost equals the per-ton material price times the tons carried plus delivery; that can vary widely by material type and distance. For an accurate truck-load price and exact tonnage for your address, request a quote on Hello Gravel—remember our minimum order is 3 tons.

Costs vary a lot with width, depth, and material, but here is a sample estimate: a 12-foot-wide, 1,000-foot driveway (12,000 sq ft) at 4u0022 depth requires about 148 cubic yards or roughly 190–220 tons. At $50 per ton that would be roughly $9,500–$11,000 for materials and delivery, excluding grading, compaction, edging, or contractor labor. Because local stone types, delivery distance, and truck sizes affect price, get a site-specific quote from Hello Gravel for a precise number.

Using a typical tri-axle load of about 10 cubic yards as an example: at 3u0022 depth one cubic yard covers 108 sq ft, so 10 yards covers about 1,080 sq ft. For a 12-foot-wide driveway that equals about 90 linear feet at 3u0022 depth, or about 67 linear feet at 4u0022 depth. Actual truck capacity and material density vary, so check with Hello Gravel when ordering to confirm how many truckloads you need.

Cheaper options locally are usually pit run, bank run, crusher run, or recycled crushed concrete. These materials are often suitable for driveway bases because they are well-graded and compactable, but they can be dustier or less attractive as a finished surface. Many homeowners combine a cheaper compactable base with a nicer top layer (pea gravel, crushed stone, or DG) for appearance and performance.

A properly installed gravel driveway in Sunbow typically lasts 7–15 years before a significant refresh is needed, though sections can last longer with upkeep. Maintenance includes annual raking and grading to fill ruts, adding 1–2 inches of new gravel every 2–4 years in high-traffic areas, and clearing drainage channels after heavy rain. California’s dry climate reduces freeze-thaw damage but can increase dust and weed growth, so occasional weed control and edging are useful.

Use this simple method: multiply length (ft) times width (ft) times desired depth (in) and divide by 324 to get cubic yards. Convert cubic yards to tons by multiplying by about 1.3 (regional average; actual density depends on the material). Example: a 20 ft x 50 ft area at 4u0022 depth = (20*50*4)/324 = 12.35 cu yd, or roughly 16 tons. You can also use Hello Gravel’s online calculator or contact our team for help and to confirm minimum order and delivery options.