Fill Dirt in Seaside, CA

A typical tri-axle dump truck delivers roughly 10–12 cubic yards (about 12–18 tons depending on moisture and density). Delivered price in the Salinas/Seaside area varies by supplier, haul distance, and job access; as a ballpark expect a full truckload to run from about $400 to $1,200. For an exact price and available delivery dates, request a quote through Hello Gravel (minimum order 3 tons).

Prices vary by local supplier and material quality, but in the Salinas/Seaside region you can commonly see delivered fill dirt in the range of about $25 to $50 per cubic yard. Convert yards to tons using roughly 1.2–1.6 tons per cubic yard (varies with moisture). Many suppliers offer tiered pricing or discounts for larger orders (for example on orders over 10–20 cubic yards); request a volume quote on Hello Gravel to see negotiated local rates.

Volume depends on how much height you need: 2 inches = about 6.1 cubic yards, 3 inches = about 9.3 cubic yards, and 6 inches = about 18.5 cubic yards for a 1,000 sq ft area. Using the local price range of $25–$50 per cubic yard, material cost would be roughly $150–$465 for 2–3 inches of fill, or $460–$925 for 6 inches, plus any delivery fees and taxes. For an accurate figure, use our material calculator and get a local quote since regional sourcing and truck access affect the final price.

Most material suppliers and drivers in the Hello Gravel network do not include compaction as a standard service; drivers may offer limited tailgate spreading at their discretion. For proper compaction you should plan to rent a plate compactor or hire a local contractor with a roller or compaction equipment, especially for driveways or any structural fill in Seaside’s coastal soils. Hello Gravel can help coordinate material delivery while we recommend local equipment rental shops and contractors for compaction.

For small, non-structural yard fills you can add fill dirt directly on existing soil but avoid placing uncompacted fill over wet or organic topsoil if you want stable results. For driveways, slopes, or heavy loads you should remove organic topsoil, install a geotextile if soils are weak or poorly drained, and build a compacted base layer of crushed rock before applying fill. Seaside’s coastal and alluvial soils can have poor drainage and variable bearing capacity, so plan on proper site prep and compaction for long-term performance.

Fill dirt is not appropriate for drainage media; French drains require clean, washed drain rock (gravel) and perforated pipe to function correctly. Hello Gravel can deliver the correct drain rock, pipe, and related materials, and some local suppliers or contractors we work with may offer installation—availability varies by supplier. If you need installation, request it in the order notes and our team can check whether your local supplier provides installation services.

Costs depend on driveway width, desired base depth, and whether you include labor. As an example, for a typical single-car driveway 20 ft long by 10 ft wide with a 6-inch compacted base you need about 3.7 cubic yards of base material. If delivered base material runs $40–$80 per cubic yard and installation/compaction labor adds $15–$40 per cubic yard, total project cost could be approximately $200–$450 for that example; larger or heavier-duty driveways will cost more. Get a local quote through Hello Gravel with your exact dimensions and access notes for a precise supply-and-install estimate.

Fill dirt is typically subsoil and lacks the organic matter and nutrients grass needs; it is not recommended as a final surface for turf establishment. For lawns in the Salinas/Seaside area, order screened topsoil or a topsoil/top-dirt blend designed for seeding or sod—many local suppliers on Hello Gravel offer these screened mixes. You can also top-dress fill dirt with 4–6 inches of screened topsoil or amend it with compost before planting for better turf results.

Some suppliers in the region do offer engineered or stabilized mixes (for example roadbase, soil-cement blends, or lime-stabilized soils) and erosion-control products like coir logs, erosion-control matting, and slope seeding materials. Availability and on-site services vary by supplier and job size, so request these options when you get a quote. Hello Gravel can check local supplier capabilities and add erosion-control materials to your delivery if they are available.

Drivers may be willing to do limited tailgate spreading at their discretion, but spreading or grading beyond that is not guaranteed and depends on site access, safety, and local supplier policy. Top-dressing without excavation is possible for small, cosmetic jobs, but for accurate leveling and proper compaction you should plan on grading equipment or a landscaper. When ordering, request spreading in the Order Notes and our team will pass it to the supplier, but expect that formal spreading/grading is a separate paid service if available.