Fill Dirt in San Simeon, CA

In the San Simeon area, 1 cubic yard of fill dirt typically ranges from about $10 to $35 per cubic yard delivered, depending on supplier, distance, and site access. One cubic yard usually weighs roughly 1.2 to 1.5 tons depending on moisture and compaction. Hello Gravel has a minimum order of 3 tons, so you may see per-yard pricing change with small orders.

The best way is to check your zip code on Hello Gravel and request a quote, since price depends on local suppliers, haul distance, and site conditions. Provide project address, desired delivery date, and any site access notes to get an accurate delivered price and scheduling options.

Yes, fill dirt is generally cheaper than topsoil because it is mostly subsoil with little organic matter and fewer processing steps. In coastal areas like San Simeon, topsoil can be harder to source and may cost more, so expect fill dirt to be the lower-cost option for bulk grading and backfill work.

Probably not safely. A typical full-size pickup bed usually carries about 1/2 to 3/4 cubic yard of dirt without exceeding weight limits, so one full cubic yard can be too heavy or overfill the bed. For safety and convenience, we recommend delivery by dump truck for most orders.

A typical tri-axle dump truck load holds about 10 to 13 cubic yards. In San Simeon the total cost for a full truckload of fill dirt often falls in the range of $250 to $900, depending on material price, haul distance, and site access; contact Hello Gravel for a firm quote for your address.

Two inches is generally too thin for raising grade or creating a stable base. For most leveling and minor grading, plan on 4 to 6 inches, and for more substantial raises or areas that will be driven on, 6 to 12 inches in compacted lifts is common. Always place fill in layers and compact between lifts to avoid future settling.

One cubic yard is a pile roughly 3 feet long by 3 feet wide by 3 feet tall. Visually, it fills about half to three-quarters of a standard pickup bed and is roughly the size of a small washing machine stacked twice.

Measure the area in square feet and the depth in inches, then use this formula: (area ft2 x depth in) / 324 = cubic yards needed. To convert to tons, multiply cubic yards by about 1.3 (varies with moisture and compaction). You can also use Hello Gravel's material calculator or contact our team for help with estimates.

Yes, fill dirt sourced near San Simeon often reflects local geology and can include sandy material, clay, small rocks, and shell fragments because of the coastal setting. If you need a specific texture (clean fill, rock-free, or screened material), add that request in Order Notes and ask our team—regional suppliers vary in what they can provide.