Fill Dirt in San Jacinto, CA

Delivered fill dirt in San Jacinto typically runs about $10 to $30 per ton, depending on supply and distance. Factors that change price include haul distance from local pits, truck size and minimums, moisture content, whether the material is screened or contains rock, and seasonal demand after heavy rains.

Local sources are landscape supply yards, small quarries, and regional soil suppliers serving Riverside County; Hello Gravel connects you with these local haulers. Minimums vary by supplier, but Hello Gravel requires a 3-ton minimum and most local trucks and yards start around 3 to 5 tons per delivery.

San Jacinto’s clay-rich subsoils can hold water, expand, and shrink, so plain loose fill dirt can rut or settle if not compacted and drained properly. Plan for extra compaction, well-graded material, and surface drainage measures because winter rains can cause erosion and temporary soft spots.

For a driveway base, use compactable fill dirt with low organic content and some coarse material (a 3/4u0022 minus or well-graded mix) compacted in lifts, or use engineered base materials like crusher run on top of compacted fill. For landscape fill, screened fill dirt with more fines and minimal organics is fine for raising grades and planting beds, but topsoil should be added where you intend to grow plants.

Possibly. Any project that changes yard elevations, affects drainage, or involves large volumes may trigger San Jacinto or Riverside County grading permits and soils reports. Contact the City of San Jacinto Planning/Building Department before major fills to confirm permit thresholds and any import restrictions.

A 1,000 sq ft area raised 6 inches requires 500 cubic feet, which is about 18.5 cubic yards. Allowing 15-25% for compaction and settling means ordering roughly 22 to 23 cubic yards, which converts to about 28 to 35 tons depending on soil density.

Most local deliveries use tri-axle dump trucks carrying roughly 10 to 15 cubic yards; end-dumps and larger bottom-dump trucks are also used for big jobs. Delivery fees depend on distance and load size—many Hello Gravel orders include free delivery in nearby areas, while longer hauls may add $50 to $200; site access issues include narrow driveways, overhead wires, soft lawns, and need for a hard turn-around.

Fill dirt itself is durable as a subgrade but can erode or crack on bare slopes and will not serve as a finished surface. Protect exposed fill with a surfacing layer (gravel, decomposed granite, or sod), install proper drainage, use mulch or erosion control fabric on slopes, and add weed control measures like landscape fabric or preemergent herbicide as appropriate.

Fill dirt is meant to raise grades and fill holes, not as a finished wearing surface. Crusher run is a better choice for driveway bases because it compacts well and sheds water, decomposed granite is good for walking paths and dry landscapes, and sand is only suitable for specific drainage or bedding uses. For driveways, the typical approach is compacted fill dirt for grade, crusher run as a base, and crushed rock or DG as the top surface.

For small areas, rent a plate compactor or reversible plate; for larger or structural fills use a vibratory drum roller or sheep's foot roller and compact in 6- to 8-inch lifts. For fills over a few feet, near foundations, or supporting structures, hire a licensed grading contractor and consult a geotechnical engineer for proper compaction specifications and testing.