Fill Dirt in San Antonio Heights, CA

For backfilling and grading, plain fill-dirt is usually cheaper per cubic yard than decorative gravel in the San Antonio Heights area, because fill-dirt is a basic, locally sourced material. Final cost depends on local supply and hauling; get a quote through Hello Gravel to compare delivered prices for your exact address. Keep in mind Hello Gravel has a 3-ton minimum order and delivery is typically by dump truck.

Delivered fill-dirt prices in the California region commonly fall within a broad range (roughly $20 to $45 per cubic yard or about $15 to $35 per ton) depending on local availability, soil type, and distance from supplier. Because San Antonio Heights can have variable terrain and local sourcing, prices will vary—use Hello Gravel’s online quote tool for an accurate delivered price. These figures are estimates and not a guarantee of final cost.

A standard tri-axle dump truck holds about 10 to 12 cubic yards of loose fill-dirt. At the example price range above, a 10-yard load would typically cost about $200 to $450 delivered, and a 12-yard load about $240 to $540, though exact rates depend on your San Antonio Heights location and supplier. Remember weight and local road restrictions can affect the final charge.

For structural backfill and final grade work you should order fill-dirt because it compacts and supports finished surfaces; gravel is better for drainage layers, paths, or decorative surfacing. In San Antonio Heights where native soils can be clayey or rocky, fill-dirt helps create a stable, compactable base while gravel on top can improve runoff. If you need both, order fill-dirt for the grade and a thin layer of crushed rock or gravel where surface drainage or a finished texture is required.

To cover 1,000 sq ft you need about 6.17 cubic yards at 2 inches, 9.26 cubic yards at 3 inches, and 12.35 cubic yards at 4 inches. Using the earlier price range, delivered material only would typically run about $120–$555 depending on depth and local price per yard; add extra for any requested tailgate spreading since drivers perform spreading at their discretion and may charge for it. For an exact delivered-and-spread estimate, request a quote and note spreading in order notes—driver will assess feasibility on arrival.

Loose fill-dirt in the San Antonio Heights area generally weighs about 1.2 to 1.6 tons per cubic yard depending on moisture and composition. That means a 10-yard load will usually be roughly 12 to 16 tons and a 12-yard load roughly 14 to 19 tons. When ordering, most homeowners buy by the cubic yard; if you prefer tons, ask Hello Gravel for the supplier’s specific conversion for your delivery.

Using the typical delivered range, 10 cubic yards of fill-dirt will generally cost about $200 to $450, but the exact price depends on supplier, distance, and any local fees for San Antonio Heights. To get a firm number, enter your zip code on Hello Gravel and request a 10-yard delivery quote—minimums and availability apply. If you need spreading, add that note at checkout and expect the driver to assess on arrival.

Yes—you can place fill-dirt on top of existing soil to raise grade, but do it in thin lifts (a few inches at a time) and compact between lifts for stability and to avoid future settling. Calculate volume the same way: multiply area by desired depth and convert to cubic yards (for example, raising 500 sq ft by 3 inches needs about 4.6 cubic yards). For steeper slopes or large raises in San Antonio Heights, check local grading rules and consider professional compaction to maintain stability.

Pea gravel does not compact well and will shift or settle under load, so it is a poor choice when you need a stable grade or structural backfill; it can also hamper soil contact for future planting. For grading and backfill, compactable materials like clean fill-dirt, engineered fill, crusher-run, or compactible base rock are better alternatives. If you need surface texture or drainage, combine fill-dirt for the grade with a thin top layer of crushed rock where appropriate.

A 50 lb bag of fill-dirt is about 0.5 cubic foot, so it covers roughly 6 square feet at a 1-inch depth or about 3 square feet at 2 inches—very small coverage. Bulk delivery becomes more economical once you need many bags (often 10–20 bags or more) or when your project requires multiple cubic yards; Hello Gravel’s minimums (3 tons) and dump-truck deliveries are usually best for larger projects. For exact comparisons, plug your project dimensions into Hello Gravel’s material calculator and request a delivered quote.