Gravel in Redlands, CA

It depends on the depth you want. For example, 1,000 sq ft at 2 inches deep is about 6.2 cubic yards (roughly 8 to 9 tons), while at 3 inches it's about 9.3 cubic yards (roughly 12 to 14 tons). Use our material calculator or request a quote for an exact amount based on the gravel type you choose.

Most local deliveries use tri-axle dump trucks that carry about 10 to 12 tons of gravel, which will cover roughly 400 to 700 sq ft depending on the depth you spread (2 to 3 inches). Coverage varies by gravel type and compaction, so confirm the expected load size and coverage when you place your order.

As a rule of thumb, 1 ton of gravel covers about 100 sq ft at a 1-inch depth, or about 50 sq ft at a 2-inch depth. Actual coverage varies with gravel density and particle size, so treat this as an estimate and check with our calculator or sales team for precise planning.

Two inches is usually too thin for a driveway that will see vehicle traffic. For light-use driveways you should plan on 3 to 4 inches compacted, and for regular car traffic or heavier loads 4 to 6 inches with a compacted base is better. Local soil and drainage in Redlands also matter, so we recommend a proper base and edging to keep gravel in place.

Cost depends on width, depth, and gravel type. For a typical single-lane 20 ft long by 10 ft wide driveway (200 sq ft) at 3 inches deep you would need about 1.9 cubic yards (around 2.5 to 3 tons); depending on material and delivery, expect a wide price range and get a personalized quote. Use our online calculator or contact Hello Gravel for an accurate delivered price.

Yes, many homeowners install gravel themselves for paths and small driveways. Basic steps are site prep, edge installation, adding a compacted base, and spreading the top layer; a rented plate compactor makes a big difference. If you prefer, our drivers may offer tailgate spreading at their discretion, but we recommend planning for spreading and compaction yourself or hiring a local contractor for larger jobs.

For a 10x10 area (100 sq ft), depth determines the amount: at 1 inch you need about 0.3 cubic yards, at 2 inches about 0.6 cubic yards, and at 3 inches about 0.9 cubic yards. In many cases that translates to roughly 0.5 to 1 ton depending on gravel density, so check the calculator and order at least our 3-ton minimum or combine materials with neighbors if you need less.

A well-installed gravel surface can last many years, but it needs maintenance like regrading and topping up every few years. In Redlands' dry Mediterranean climate, erosion from occasional storms and vehicle tracking are the main concerns, so proper drainage and periodic replenishment will extend the life of the surface.

A common approach is a layered system: a compacted base of larger crushed material (3/4 inch to 1 1/2 inch) topped with a 3/4 inch crushed stone or 3/8 inch minus for a smoother surface. This combination gives stability, good drainage, and a comfortable surface for vehicles. Local suppliers in the Redlands area often carry these blends, reflecting regional rock types.

The most economical option is to order bulk material delivered by dump truck rather than buying bagged gravel. Choosing locally sourced road base or recycled aggregate can also lower cost. Use Hello Gravel to compare local supplier prices and delivery options to get the best value for your exact needs.

Locally in Redlands, common lower-cost options include road base, crushed recycled concrete, and local river-run rock, which are often cheaper than decorative colored gravels. Prices vary by supplier and availability, so request quotes through Hello Gravel to see current local pricing and delivery options.

A typical tri-axle dump truck carrying about 10 to 12 tons should cover roughly 400 to 600 sq ft at a 2-inch depth, depending on the gravel type and how compacted it is. If you need an exact coverage estimate for your site, we can calculate it when you tell us the desired depth and material.

Capacity depends on the trailer side height, but a 7x14 dump trailer commonly holds about 3 to 6 cubic yards of material. For planning, ask the trailer owner or supplier for exact side height and volume, or use our calculator to convert cubic yards to tons for ordering delivery.

Yes, lower-cost alternatives include compacted crusher-run base, recycled concrete, and decomposed granite, depending on the look and performance you want. Each option has trade-offs in appearance, drainage, and maintenance, so consider function first and get sample materials or local advice before deciding.